admin管理员组文章数量:1627461
前言
在Linux平台下,能完美兼容.dwg文件的软件并不多。
虽然国产的中望和浩辰为适配uos操作系统,近期都推出了linux版本,但目前好像还没有对应的破姐流出。(如果有的话请私信我或留下评论)
然而有了这一款源自比利时的软件——bricscad,linux下查看和编辑.dwg文件再也不是噩梦了!
安装pj
资源链接:https://pan.baidu/s/1dC7zarlqwuO5fa4CBL_KGQ
提取码:24j6
1.下载对应的压缩包,解压并安装其中对应的deb或rpm软件包。
2.在Crack文件夹下,替换bricsys.lic中hostid=< yourmac >等号后面的值为你的mac地址。例如本人的mac地址为AA:BB:CC:DD:EE:FF,替换后为hostid=AABBCCDDEEFF。
3.再把Bricsys-NetworkLicenseManager.tgz压缩包中的文件全部解压到安装目录下(默认为/opt/bricsys/bricscad/v18/),然后再把rlm.zip中的rlm解压出来,连同bricsys.set和替换过mac地址的bricsys.lic文件一起,同样放到安装目录下,大功告成。
软件运行
每次运行bricscad前,都需要先运行安装目录下的rlm,当出现如下界面时,表明激活成功,再运行bricscad即可。
为避免每次启动bricscad都要进行这一步,可以将程序rlm设成开机启动,在Fedora32下的具体操作为:(以下操作均需root)
首先,编辑/etc/rc.d/rc.local,在该文件中添加一行:
/opt/bricsys/bricscad/v18/rlm &
如下所示
&前为破解文件rlm的安装路径。另外需注意,行末的&一定要加,否则重启后就会一直卡在这行命令没法开机了,到时候只能进入单用户模式急救了!
然后为rc.local添加可执行权限
chmod +x /etc/rc.d/rc.local
最后将rc-local.service设置为开机自启动
systemctl enable rc-local.service
如果出现以下错误提示:
The unit files have no [Install] section. They are not meant to be enabledusing systemctl.
Possible reasons for having this kind of units are:1) A unit may be statically enabled by being symlinked from another unit’s
.wants/ or .requires/ directory.2) A unit’s purpose may be to act as a helper for some other unit which has a requirement dependency on it.3) A unit may be started when needed via activation (socket, path, timer,
D-Bus, udev, scripted systemctl call, …).
那么在rc-local.service文件末尾加入如下内容即可。
[Install]
WantedBy=multi-user.target
本文标签: 替代品完美LinuxAutoCADbricscad
版权声明:本文标题:linux下autocad完美替代品bricscad的安装运行 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://www.elefans.com/xitong/1728984228a1181855.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论