admin管理员组文章数量:1590508
上电
一、断电开机按Mode
二、switch:flash_init
三、switch:dir flash:
四、switch: rename flash:config.text flash:backconfig.text
五、switch:boot
重启运行
一、Switch#rename flash:backconfig.text flash:config.text
二、Switch#copy flash:config.text system:running-config
三、Switch(config)#no enable password
步骤
Using driver version 1 for media type 1
Base ethernet MAC Address: 04:0b:0d:4b08:00
Xmodem file system is available.
The password-recovery mechanism is enabled.
The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
flash_init
boot
switch: flash_init
Initializing Flash...
mifs[2]: 10 files, 1 directories
mifs[2]: Total bytes : 1806336
mifs[2]: Bytes used : 612352
mifs[2]: Bytes available : 1193984
mifs[2]: mifs fsck took 2 seconds.
mifs[3]: 0 files, 1 directories
mifs[3]: Total bytes : 3870720
mifs[3]: Bytes used : 1024
mifs[3]: Bytes available : 3869696
mifs[3]: mifs fsck took 1 seconds.
mifs[4]: 5 files, 1 directories
mifs[4]: Total bytes : 258048
mifs[4]: Bytes used : 9216
mifs[4]: Bytes available : 248832
mifs[4]: mifs fsck took 0 seconds.
mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 258048
mifs[5]: Bytes used : 9216
mifs[5]: Bytes available : 248832
mifs[5]: mifs fsck took 1 seconds.
-- MORE --
mifs[6]: 566 files, 19 directories
mifs[6]: Total bytes : 57931776
mifs[6]: Bytes used : 15291392
mifs[6]: Bytes available : 42640384
mifs[6]: mifs fsck took 30 seconds.
...done Initializing Flash.
switch: dir flash:
Directory of flash:/
2 -rwx 796 <date> vlan.dat
3 -rwx 1919 <date> private-config.text
4 -rwx 2797 <date> config.text
5 -rwx 5144 <date> multiple-fs
6 drwx 512 <date> c2960s-universalk9-mz.122-55.SE7
42640384 bytes available (15291392 bytes used)
switch: rename flash:config.text flash:backconfig.text
switch: dir flash:
Directory of flash:/
2 -rwx 796 <date> vlan.dat
3 -rwx 1919 <date> private-config.text
4 -rwx 2797 <date> backconfig.text
5 -rwx 5144 <date> multiple-fs
6 drwx 512 <date> c2960s-universalk9-mz.122-55.SE7 42640384 bytes available (15291392 bytes used)
switch: boot
Loading "flash:/c2960s-universalk9-mz.122-55.SE7/c2960s-universalk9-mz.122-55.SE7.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:/c2960s-universalk9-mz.122-55.SE7/c2960s-universalk9-mz.122-55.SE7.bin" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 28-Jan-13 10:28 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x01B00000
Initializing flashfs...
Using driver version 1 for media type 1
mifs[3]: 10 files, 1 directories
mifs[3]: Total bytes : 1806336
mifs[3]: Bytes used : 612352
mifs[3]: Bytes available : 1193984
mifs[3]: mifs fsck took 0 seconds.
mifs[3]: Initialization complete.
mifs[4]: 0 files, 1 directories
mifs[4]: Total bytes : 3870720
mifs[4]: Bytes used : 1024
mifs[4]: Bytes available : 3869696
mifs[4]: mifs fsck took 0 seconds.
mifs[4]: Initialization complete.
mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 258048
mifs[5]: Bytes used : 9216
mifs[5]: Bytes available : 248832
mifs[5]: mifs fsck took 0 seconds.
mifs[5]: Initialization complete.
mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes : 258048
mifs[6]: Bytes used : 9216
mifs[6]: Bytes available : 248832
mifs[6]: mifs fsck took 0 seconds.
mifs[6]: Initialization complete.
mifs[7]: 566 files, 19 directories
mifs[7]: Total bytes : 57931776
mifs[7]: Bytes used : 15291392
mifs[7]: Bytes available : 42640384
mifs[7]: mifs fsck took 0 seconds.
mifs[7]: Initialization complete.
...done Initializing flashfs.
POST: MA BIST : BeginYeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G FC 1 MBIST Unload Activity
***ERR: S88G FC 1 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G DP Sg1 MBIST Unload Activity
***ERR: S88G DP Sg1 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G DP Xg1 MBIST Unload Activity
***ERR: S88G DP Xg1 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G NI 1 MBIST Unload Activity
***ERR: S88G NI 1 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G FC 0 MBIST Unload Activity
***ERR: S88G FC 0 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G DP Sg0 MBIST Unload Activity
***ERR: S88G DP Sg0 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G DP Xg0 MBIST Unload Activity
***ERR: S88G DP Xg0 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G NI 0 MBIST Unload Activity
***ERR: S88G NI 0 MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G UPB MBIST Unload Activity
***ERR: S88G UPB MBIST failed
Yeti2S88gMdioWr: Unknown status for write operation
POST: MA BIST : End, Status Passed
POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed
extracting front_end/front_end_ucode_info (86 bytes)
Waiting for Stack Master Election...
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
POST: PortASIC Stack Port Loopback Tests : Begin
POST: PortASIC Stack Port Loopback Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed
Election Complete
Switch 1 booting as Master
Waiting for Port download...Complete
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.
cisco WS-C2960S-48TS-L (PowerPC) processor (revision K0) with 131072K bytes of memory.
Processor board ID FOC1739Y15K
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
52 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 04:0B:0D:0B:08:00
Motherboard assembly number : 73-11909-09
Power supply part number : 341-0327-04
Motherboard serial number : FO0730F
Power supply serial number : LIT1720WG
Model revision number : K0
Motherboard revision number : A0
Model number : WS-C2960S-48TS-L
Daughterboard assembly number : 73-1100-04
Daughterboard serial number : FOC080VA
System serial number : FO0015K
Top Assembly Part Number : 800-00000-06
Top Assembly Revision Number : A0
Version ID : V06
CLEI Code Number : C00ARF
Daughterboard revision number : A0
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 52 WS-C2960S-48TS-L 12.2(55)SE7 C2960S-UNIVERSALK9-M
Press RETURN to get started!
*Mar 1 00:00:12.284: Read env variable - LICENSE_BOOT_LEVEL =
*Mar 1 00:00:12.881: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2960s_lanbase Next reboot level = lanbase and License = lanbase
*Mar 1 00:02:03.349: %STACKMGR-4-SWITCH_ADDED: Switch 1 has been ADDED to the stack
*Mar 1 00:02:04.649: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Mar 1 00:02:05.661: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Mar 1 00:02:58.908
--- System Configuration Dialog ---
Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enable secret
If you choose not to enter the intial configuration dialog, or if you exit setup without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0 <cleartext password>
----------------------------------
Would you like to enter the initial con: %STACKMGR-5-SWITCH_READY: Switch 1 is READY
*Mar 1 00:02:58.913: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state DOWN
*Mar 1 00:02:58.913: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 1 has changed to state DOWN
*Mar 1 00:02:59.395: %STACKMGR-5-MASTER_READY: Master figuration dialog? [yes/no]:
Would you like to enter the initial configuration dialog? [yes/no]: Switch 1 is READY
*Mar 1 00:02:59.400: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 28-Jan-13 10:28 by prod_rel_team
*Mar 1 00:02:59.856: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.
*Mar 1 00:03:01.193: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to down
*Mar 1 00:03:02.195: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: n
Switch>enable
Switch#rename flash:backconfig.text flash:config.text
Destination filename [config.text]? 这里直接回车不写任何字符,不然更改的名字为变成你输入字符
Switch#dir
Directory of flash:/
3 -rwx 1048 Mar 1 1993 00:03:04 +00:00 multiple-fs
2 -rwx 796 Mar 1 1993 00:08:57 +00:00 vlan.dat
4 -rwx 2797 Mar 1 1993 00:03:06 +00:00 config.text
6 drwx 512 Mar 1 1993 00:14:37 +00:00 c2960s-universalk9-mz.122-55.SE7
57931776 bytes total (42647040 bytes free)
Switch#copy flash:config.text system:running-config
Destination filename [running-config]?
% Generating 1024 bit RSA keys, keys will be non-exportable...
*Mar 1 00:05:27.202: %LINK-5-CHANGED: Interface FastEthernet0, changed state to administratively down[OK]
*Mar 1 00:05:31.827: %SSH-5-ENABLED: SSH 1.99 has been enabled
2797 bytes copied in 9.306 secs (301 bytes/sec)
*Mar 1 00:05:33.059: %PKI-6-AUTOSAVE: Running configuration saved to NVRAM
2960#enable
2960#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
2960(config)#hostname Switch
Switch(config)#no enable password
Switch(config)#line console 0
Switch(config-line)#no password
Switch(config-line)#end
Switch#write
*Mar 1 00:06:18.619: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
Switch#reload
Proceed with reload? [confirm]
*Mar 1 00:06:33.693: %SYS-5-RELOAD: Reload requested by console. Reload reason: Reload command
Using driver version 1 for media type 1
Base ethernet MAC Address: 04:0b:0d:0b:08:00
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
mifs[2]: 10 files, 1 directories
mifs[2]: Total bytes : 1806336
mifs[2]: Bytes used : 612352
mifs[2]: Bytes available : 1193984
mifs[2]: mifs fsck took 2 seconds.
mifs[3]: 0 files, 1 directories
mifs[3]: Total bytes : 3870720
mifs[3]: Bytes used : 1024
mifs[3]: Bytes available : 3869696
mifs[3]: mifs fsck took 1 seconds.
mifs[4]: 5 files, 1 directories
mifs[4]: Total bytes : 258048
mifs[4]: Bytes used : 9216
mifs[4]: Bytes available : 248832
mifs[4]: mifs fsck took 0 seconds.
mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 258048
mifs[5]: Bytes used : 9216
mifs[5]: Bytes available : 248832
mifs[5]: mifs fsck took 1 seconds.
版权声明:本文标题:思科2960恢复密码 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://www.elefans.com/xitong/1728091012a1145115.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论