admin管理员组文章数量:1569343
在kali中设置网络
大家在安装kali虚拟机之后没有进行设置进行网络连接可能会发现一直弹出dhcp网络连接错误。
这是因为你的网卡并没有ip地址而且是dhcp模式所以要进行一些设置。
1.首先把kali虚拟机的网络适配器更改为桥接模式直连物理网络。
2.查看自己主机的(是自己真实电脑的不是虚拟机)ip地址,网关,网段
你的windows 键(键盘左下角那个微软图标) + r ,然后输入cmd ,调出shell ,输入ipconfig查看ip
比如我的地址:
3.修改/etc/network/interfaces 文件:gedit /etc/network/interfaces
“address”把ip地址设置为自己主机网段中的一个,比如我的ip是192.168.0.40,我可以设为192.168.0.66
“gateway” 在其中加上自己主机的网关,比如我的就是192.168.1.1
“netmask”子网掩码照抄自己主机的,比如我的为为255.255.254.0
修改结果如下:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface**
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.0.66
gateway 192.168.1.1
netmask 255.255.254.0
4.修改dns
gedit /etc/resolv.conf
添加几个常用DNS
可以直接粘贴我下面写的
domain
nameserver 8.8.8.8
nameserver 114.114.114.114
search localdomain
5.重启网络服务
/etc/init.d/networking restart(可能需要等一会)
弹出以下界面时就行了:
6.输入 ifconfig -a 查看ip
可以看出我的ip就是我自己设置的。
然后就可以上网了。
谢谢观看,有问题请留言。
版权声明:本文标题:kali虚拟机设置网络连接 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://www.elefans.com/xitong/1727652189a1123556.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论