admin管理员组文章数量:1566644
http://www.cisco/c/en/us/support/docs/quality-of-service-qos/qos-congestion-avoidance/10107-showpolicy.html
This section explains how your router allocates conversation numbers for the queues created when the service policy is applied.
Router# show policy-map interface s1/0.1 dlci 100 Serial1/0.1: DLCI 100 - output : mypolicy Class voice Weighted Fair Queueing Strict Priority Output Queue: Conversation 72 Bandwidth 16 (kbps) Packets Matched 0 (pkts discards/bytes discards) 0/0 Class immediate-data Weighted Fair Queueing Output Queue: Conversation 73 Bandwidth 60 (%) Packets Matched 0 (pkts discards/bytes discards/tail drops) 0/0/0 mean queue depth: 0 drops: class random tail min-th max-th mark-prob 0 0 0 64 128 1/10 1 0 0 71 128 1/10 2 0 0 78 128 1/10 3 0 0 85 128 1/10 4 0 0 92 128 1/10 5 0 0 99 128 1/10 6 0 0 106 128 1/10 7 0 0 113 128 1/10 rsvp 0 0 120 128 1/10 Class priority-data Weighted Fair Queueing Output Queue: Conversation 74 Bandwidth 40 (%) Packets Matched 0 Max Threshold 64 (packets) (pkts discards/bytes discards/tail drops) 0/0/0 Class class-default Weighted Fair Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 64 Max Threshold 20 (packets)
The class-default class is the default class to which traffic is directed, if that traffic does not satisfy the match criteria of other classes whose policy is defined in the policy map. The fair-queue command allows you to specify the number of dynamic queues into which your IP flows are sorted and classified. Alternately, your router allocates a default number of queues derived from the bandwidth on the interface or VC. Supported values in either case are a power of two, in a range from 16 to 4096.
This table lists the default values for interfaces and for ATM permanent virtual circuits (PVCs):
Default Number of Dynamic Queues as a Function of Interface BandwidthBandwidth Range | Number of Dynamic Queues |
---|---|
Less than or equal to 64 kbps | 16 |
More than 64 kbps and less than or equal to 128 kbps | 32 |
More than 128 kbps and less than or equal to 256 kbps | 64 |
More than 256 kbps and less than or equal to 512 kbps | 128 |
More than 512 kbps | 256 |
Bandwidth Range | Number of Dynamic Queues |
---|---|
Less than or equal to 128 kbps | 16 |
More than 128 kbps and less than or equal to 512 kbps | 32 |
More than 512 kbps and less than or equal to 2000 kbps | 64 |
More than 2000 kbps and less than or equal to 8000 kbps | 128 |
More than 8000 kbps | 256 |
Based on the number of reserved queues for weighted fair queuing, Cisco IOS assigns a conversation or queue number as shown in this table:
Conversation / Queue Number | Type of Traffic |
---|---|
1 - 256 | General flow-based traffic queues. Traffic that does not match to a user-created class will match to class-default and one of the flow-based queues. |
257 - 263 | Reserved for Cisco Discovery Protocol (CDP) and for packets marked with an internal high-priority flag. |
264 | Reserved queue for the priority class (classes configured with the priority command). Look for the "Strict Priority" value for the class in the show policy-map interface output. The priority queue uses a conversation ID equal to the number of dynamic queues plus eight. |
265 and higher | Queues for user-created classes. |
Confirming Your Service Policy
本文标签: QoSCiscoConversationallocatedNUMBERS
版权声明:本文标题:cisco qos--How Are Conversation Numbers Allocated? 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://www.elefans.com/xitong/1725457597a1024388.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论