admin管理员组文章数量:1565788
2024年5月20日发(作者:)
解除磁盘被写保护的4种方法
英文回答:
There are several methods to remove write protection
from a disk. I will discuss four of them below.
1. Using the physical write protection switch: Some
removable storage devices, such as SD cards and USB flash
drives, have a physical switch that allows you to enable or
disable write protection. You can simply toggle the switch
to the opposite position to remove write protection. For
example, if the switch is in the "lock" position, move it
to the "unlock" position.
2. Modifying the registry: This method is applicable to
Windows operating systems. You can remove write protection
by modifying the registry settings. First, press the
Windows key + R to open the Run dialog box. Then, type
"regedit" and press Enter to open the Registry Editor.
Navigate to the following key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlStorage
DevicePolicies. If the "WriteProtect" value exists, double-
click on it and change the value data to "0" to disable
write protection. If the "WriteProtect" value does not
exist, right-click on an empty space in the right pane,
select New > DWORD (32-bit) Value, and name it
"WriteProtect". Double-click on the newly created value and
set the value data to "0".
3. Using diskpart command: Diskpart is a command-line
utility in Windows that allows you to manage disks,
partitions, and volumes. You can remove write protection
using the diskpart command. First, open the Command Prompt
as an administrator. Then, type "diskpart" and press Enter
to open the diskpart utility. Enter the following commands
one by one: "list disk" (to display a list of disks),
"select disk [disk number]" (replace [disk number] with the
number of the write-protected disk), "attributes disk clear
readonly" (to remove the write protection attribute from
the disk).
4. Formatting the disk: If the above methods do not
work, you can try formatting the disk to remove write
protection. However, please note that formatting will erase
all data on the disk. To format the disk, right-click on
the write-protected disk in File Explorer or Disk
Management, select Format, choose a file system (such as
NTFS or FAT32), and click on Start to begin the formatting
process.
中文回答:
解除磁盘被写保护的方法有几种。下面我将讨论其中的四种方
法。
1. 使用物理写保护开关,一些可移动存储设备,如SD卡和
USB闪存驱动器,具有物理开关,可以让您启用或禁用写保护。您
只需将开关切换到相反的位置即可解除写保护。例如,如果开关处
于“锁定”位置,将其移动到“解锁”位置。
2. 修改注册表,这种方法适用于Windows操作系统。您可以通
过修改注册表设置来解除写保护。首先,按下Windows键 + R打开
运行对话框。然后,输入“regedit”并按Enter打开注册表编辑器。
导航到以下键,
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlStorage
DevicePolicies。如果存在“WriteProtect”值,请双击它并将值
数据更改为“0”以禁用写保护。如果不存在“WriteProtect”值,
请在右窗格的空白处右键单击,选择新建 > DWORD(32位)值,并
将其命名为“WriteProtect”。双击新创建的值,并将值数据设置
为“0”。
3. 使用diskpart命令,Diskpart是Windows中的一个命令行
实用程序,允许您管理磁盘、分区和卷。您可以使用diskpart命令
来解除写保护。首先,以管理员身份打开命令提示符。然后,输入
“diskpart”并按Enter打开diskpart实用程序。逐个输入以下命
令,“list disk”(显示磁盘列表),“select disk [磁盘编号]”
(将[磁盘编号]替换为被写保护磁盘的编号),“attributes disk
clear readonly”(从磁盘上移除写保护属性)。
4. 格式化磁盘,如果以上方法都无效,您可以尝试格式化磁盘
以解除写保护。但请注意,格式化将擦除磁盘上的所有数据。要格
式化磁盘,请在文件资源管理器或磁盘管理中右键单击被写保护的
磁盘,选择格式化,选择文件系统(如NTFS或FAT32),然后点击
开始开始格式化过程。
版权声明:本文标题:解除磁盘被写保护的4种方法 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://www.elefans.com/xitong/1716196016a491121.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论