admin管理员组文章数量:1568309
2024年4月23日发(作者:)
machine fanucom —————— 后处理文件头
define word TN ---------------------------- 定义字段;
address letter = "TOOL TYPE :- " ----- 定义字段的返回值
address width = 13 定义字符宽度
field width = 25 定义返回字的宽度
end define 结束定义
define format ( / G6 S T M1 M2 L P D E H O ) 第二段是定义字符的格式
address width = 1------------ 定义字符宽度
address width = 1------------ 定义字符宽度
field width = 2 ------------- 定义返回字的宽度
exponent width = 0 ---------- 指数的宽度
scale factor = 1 ------------- 比例因子: 值乘以 1
scale divisor = 1 ------------ 比例因子:值被 1 除
tape position = 1----------- 字前留一个空格
print position = 1 -----------打印位置
sign = none----- 用于不需要 G代码和进给率
sign = if negative 仅标识负坐标
sign = always 如果需要 + / - 号
not permanent -------- 不需要行号
not modal ------------ 仅当改变时需要重复的字为 modal 。 (模态)
通常 G 代码和 X, Y 和 Z 为 坐标为 modal,
但圆心通常使用的 I, J, K 代码通常不是,因此它们为 not modal .
metric formats --------------- 公制
leading zeros = false --------- 前导 0
trailing zeros = true ----------后导 0
decimal point = false ------ 不需要小数点
。
版权声明:本文标题:PM10.0后处理修改教程 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://www.elefans.com/xitong/1713881399a376145.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论