便携式蓝牙音乐系统CD播放器 用户手册 CD-555说明书

admin管理员组

文章数量:1565349

2024年3月3日发(作者：)

Portable Bluetooth Music System with CD Player

USER MANUAL

CD-555

PLEASE READ THIS OPERATION MANUAL COMPLETELY BEFORE OPERATING

THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

CAUTIONCLASS 1 LASER PRODUCTCLASS 1 LASER PRODUCTAPPAREIL LASER DE CLASSE 1PRODUCTO LASER DE CLASE 1INVISIBLE LASER RADIATIONWHEN OPEN AND INTERLOCKSDEFEATEDAVOID EXPOSURE TO NThis product contains a low power laser the advice below for safe operations.

ON PROTECTION AGAINST LASER ENERGY EXPOSUREAs the laser beam used in this compact disc player is harmful to the eyes, do not

•attempt to disassemble

the casing.

Stop operation immediately if any liquid or solid object should fall into the cabinet.•Do not touch the lens or poke at it. If you do, you may damage the lens and the player

•may not operate properly.

Do not put anything in the safety slot. If you do, the laser diode will be ON when the

•CD door is still open.

If the unit is not to be used for a long period of time, make sure that all power sources

•are disconnected from the unit. Remove all batteries from the battery compartment,

and unplug the AC-DC adaptor from the wall outlet. Make it a practice to remove the

AC-DC adaptor by grasping the plug and not by pulling the cord.

This unit employs a laser. The use of controls or adjustment or performance of

•procedures other than those specified here may result in exposure to hazardous

radiation.

ON PLACEMENTDo not use the unit in places, which are extremely hot, cold, dusty or humid.•Place the unit on a flat and even surface.•Do not restrict the airflow of the unit by placing it in a place with poor ventilation, by

•covering it with a cloth or by placing it on a carpet.

ON CONDENSATION• When left in a heated room where it is warm and damp, water droplets or

condensation may form inside

the unit.

• When there is condensation inside the unit, the unit may not function normally. Let it stands for 1 to 2 hours before turning the power on, or gradually heat the room

up and dry the unit before use.

Should any trouble occur, remove the power source and refer servicing to qualified

personnel.

E-1

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B Digital

Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

WARNINGChanges or modifications to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving

when

you operate the controls. These ‘feet’ are made from non-migrating rubber

material specially formulated to avoid leaving any marks or stains on your furniture.

However certain types of oil based furniture polishes, wood preservatives, or cleaning

sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the

prevent any damage to your furniture we strongly recommend that you purchase

small self-adhesive felt pads, available at hardware stores and home improvement

centers everywhere,

and apply these pads to the bottom of the rubber ‘feet’ before you

place the product on fine

wooden furniture.

E-2

Selecting fine audio equipment such as the unit you've just purchased is only the start

of your musical enjoyment. Now it's time to consider how you can maximize the fun and

excitement your equipment offers. This manufacturer and the Electronic

Industries Association's Consumer Electronics Group want you to get the most out

of your equipment by playing it at a safe level. One that lets the sound come through loud

and clear without annoying blaring or distortion and,

most importantly, without

affecting your sensitive hearing. Sound can be deceiving. Over time your

hearing "comfort level" adapts to higher volumes of sound. So what sounds "normal" can

actually be loud and harmful to your hearing. Guard against this by setting your

equipment at a safe level BEFORE your hearing establish a safe level:• Start your volume control at a low setting.• Slowly increase the sound until you can hear it comfortably and clearly, and without

distortion.• Once you have established a comfortable sound level : Set the dial and leave it

a minute to do this now will help to prevent hearing damage or loss in the future.

After all, we want you listening for a lifetime.

We Want You Listening For a Lifetime

Used wisely, your new sound equipment will provide a

lifetime of fun and enjoyment. Since hearing damage from

loud noise is often undetectable until it is too late, this

manufacturer and the Electronic IndustriesAssociation'sConsumerElectronicsGrouprecommend you avoid

prolonged exposure to excessive noise.

Customer's Record:The serial number of this product is found on its bottom cover. You should note the serial

number of this unit in the space provided as a permanent record of your purchase to aid

in identification in the event of theft of loss.

Model Number : CD-555 Serial Number :

E-3

LOCATION OF CONTROL9121214171. POWER ON / OFF BUTTON

2. LED DISPLAY

3. POWER INDICATOR

4. PROG. INDICATOR

5. REPEAT INDICATOR

6. X-BASS BUTTON

7. REPEAT BUTTON

8. PROG. BUTTON

9. SKIP / SEARCH BACKWARD

10. STOP BUTTON

11. PLAY / PAUSE BUTTON

BUTTON 12. SKIP / SEARCH FORWARD

13. PAIRING INDICATOR

BUTTON

14. FUNCTION SELECTOR

15. TUNING CONTROL

16. PLAY / PAUSE INDICATOR

17. VOLUME CONTROL

18. CD DOOR

19. CD COMPARTMENT

20. DC JACK

21. AUX IN

22. HEADPHONE JACK

23. BATTERY COMPARTMENT

24. FM ANTENNA

25. HANDLE

26. DOOR OPEN AREA

E-4

POWER SOURCEThe CD-555 operates using the supplied AC Adapter (Operate at 120V ~ 60Hz) or 6 X

’C' size (UM-2) batteries (not included).

BATTERY OPERATIONNOTE:Disconnect AC adapter before install batteries.

For best performance and longer operating time, we recommend the use of alkaline

batteries.1. Remove the Battery Door on the bottom of the unit by carefully pushing batteries

cover follow OPEN direction. The battery door can then be lifted away.

2. Following the polarity diagram shown in the battery compartment to insert 6 X `C'

size (UM-2) batteries and close the door.

BATTERY WARNING

1. Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.

2. Use only the size and type of batteries specified.

3. Do not mix old and new batteries.

4. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)

batteries.

5. If the unit is not to be used for an extended period of time, remove the batteries. Old or

leaking batteries can cause damage to the unit and may void the warranty.

6. Do not try to recharge batteries not intended to be recharged; they can overheat and

rupture. (Follow battery manufacturer’s directions).

7. Do not dispose of batteries in fire, batteries may leak or explode.

AC ADAPTOR OPERATIONNOTE:Only use the supplied adapter

1. Plug the AC adaptor into normalAC power outlet socket.

2. Insert the DC plug of the AC adaptor cord into the DC input jack at the back of the unit.

the unit is operated using AC adapter, the battery source

will automatically be

G

: Before connecting to the power supply, ensure that the supply corresponds

to the information on the rating label at the back of the apparatus.

RADIO OPERATION1. Press the POWER ON/OFF Button (#1) to turn on the CD-555. The POWER

INDICATOR (#3) will light.2. Slide the FUNCTION SELECTOR (#14) to FM position.3. Adjust the TUNING Control (#15) to select the desired radio station.4. Adjust the VOLUME Control (#17) to obtain the desired sound level.5. To turn the Radio off, press the POWER ON/OFF Button (#1) again. The POWER

INDICATOR (#3) will light FOR BEST RADIO RECEPTIONTo insure maximum FM tuner reception, unwrap and fully extend the EXTERNAL FM WIREANTENNA (#24) for best FM radio reception.E-5

CD OPERATIONNOTE: This player plays not only commercial CDs but also self-compiled CD-R/RW discs.

1. Press the POWER ON/OFF Button (#1) once to turn on CD-555. The POWER

INDICATOR (#3) will light.2. Set the FUNCTION SELECTOR (#14) to "CD" position. The player will start reading

TOC of the disc and will display "no" if no disc is loaded.3. Open the CD Door (#18). Carefully place an audio CD with its label side upward in

the CD compartment (#19) and close the CD Door (#18).4.

The total number of tracks on the CD will appear in the LED Display (#2) after a few

seconds.5. Press the Button (#11). The PLAY INDICATOR (#16) will light and the CD will

start playing from the first track.6. Adjust the Volume Control (#17) to obtain the desired sound level from the Built-in

Speakers.7. To suspend playing, press the Button (#11) again. The PLAY INDICATOR will

flash. To resume playing, press the Button (#11) again.8. You can choose to play your favorite track directly by pressing either the button

(#12) or Buttons (#9). The LED Display (#2) will indicate the correct track

number selected.9. To locate a particular passage within a track, keep the button (#12) or

Buttons (#9) depressed until it is : Low level audio will be heard during the search process to assist in locating correct

point in the track.

10. To repeat a particular track, press the REPEAT Button (#7) once or until the REPEAT

INDICATOR (#5) flashes.11. To repeat the entire CD, press the REPEAT Button (#7) twice or until the REPEAT

INDICATOR (#5) lights steadily.12. To stop playing, press the STOP Button (#10).13. When you wish to turn off the CD PLAYER, press the POWER Button (#1) again. The

POWER INDICTOR (#3) will light PROGRAMMED OPERATIONThis function allows the tracks to be played in a programmed sequence.

1. In CD stop mode, press the PROG. Button (#8) once. The CD PROG.

INDICATOR (#4) willflash and Program Channel Number "01" will

appear and blink in the LED Display (#2) to prompt for input.

2. Press the (#12) or (#9) Buttons to select the song to be

programmed. For example track 8 is selected.3. Press the PROG. Button (#8) again to store selection. The Program

Channel No. will change to “02” and blink to prompt for input4. Press the (#12) or (#9) Buttons to select the next song to beprogrammed and press the PROG. Button (#8) to store selection. For

example the second selection is track 15.

0 1802

1

5E-6

5. You may repeat steps 1 - 4 to program as many as 20 tracks.6. You may repeat the current programmed track or all programmed tracks by pressing

the REPEAT Button (#7) once or twice.7. Press STOP Button (#10) once to stop playback.8. To cancel programmed play, press the STOP Button (#10) again in STOP mode.9. When you wish to turn off the CD PLAYER, press the POWER Button again. The

POWER INDICTOR will light ON CD-R/RW DISCS•Because of non-standardized format definition/production of CD-R/RW, playback

quality & performance are not guaranteed.•Manufacturer is not responsible for the playability of CD-R/RW due to recording

conditions such as PC performance, writing software, media ability, etc.•Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a

OTH OPERATIONPairing a Bluetooth enabled device with the CD-555.

1. Press the POWER Button (#1) to turn on CD-555.

2. Slide the FUNCTION SELECTOR (#14) to the

3. The PAIRING INDICATOR (#13) will flash.

or scan function to find the CD-555.

5. Select "CD-555" from the device list when it appears on your device screen. If

required, enter the pass code “0000” to pair (link) CD-555 with your device.

6. If you are pairing (linking) your computer to the speaker using Bluetooth, you may

need to set the CD-555 as your computer’s default sound device.

7. After successfully pairing the CD-555 with your Bluetooth device, The PAIRINGINDICATOR (#13) will stop flashing and remain lit.8. If you want to pair (link) the CD-555 with another Bluetooth device, press and holdPlay/Pause

(#11) a few seconds. The PAIRING INDICATOR (#13) will flash. The

CD-555 will go into Pairing/Discoverable mode. Repeat steps 4 & you can play music from your Bluetooth device wirelessly to the CD-555.

Button (#11)on your Bluetooth 1. Select your favorite song, press the

Play/Pause

Button (#11)

device or the

Play/Pause

on the CD-555 to play or pause the song

from your Bluetooth device.

2. Press the Skip Forward Button (#12) or Skip Backward Button (#9)to

select the Next or Previous track.

(The SEARCH function does not apply to Bluetooth operation )

positiontoenter Bluetooth mode.

4. Turn on the Bluetooth function for the device you want to link to, and enable the search

E-7

3. Slowly adjust both the volume controls of your CD-555 and your Bluetooth device until

you reach a comfortable listening level.

Note :

1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth

enabled devices for Bluetooth operation since it may vary from model to model.

2. If your Bluetooth enabled device does not support A2DP profile, it will not play the

music through the speaker, even if paired (linked).3. Remember to turn off the CD-555 when you have finished listening, set the Function

Selector (#20) to the “OFF” position4. Don't forget to switch off the power of your external audio device as well.

5. The music playback will automatically be paused when you have an incoming call.

When the call is ended, the CD-555 will start playing IN OPERATIONYou can play other music sources (iPod, MP3 or other digital audio players) through the

speakers of the CD-555 by connecting the AUX IN Jack (#21) to your external player’s

audio out jack or headphone jack.

1. Plug one end of an audio cable (not included) into the AUX IN Jack (#21) and the other

end of the cable to the headphone jack of your digital audio player.2. Slide the FUNCTION SELECTOR (#14) to the AUX position.3. Press the POWER button (#1) to turn the unit on.4. Start playing the device you plugged into the AUX IN Jack (#21).5. Slowly adjust both the volume controls of your CD-550 and the external device until

you reach a comfortable listening level.

Note :

•

If you connect the CD-555 to the Line-Out Jack of your external device, you only need

to adjust the VOLUME CONTROL of your CD-555. If you connect to the Headphone

Jack of your external device, you may need to adjust both the volume controls of your

external device and the CD-555 to obtain the desirable listening level.

•

Remember to turn off the CD-555 when you have finished listening. Don't forget to

switch off the power of your external audio device as well.

X-BASS OPERATIONPress the X-BASS Button (#6) to enhance the bass effect of the music being played.

Press the X-BASS Button again to turn the effect off.

E-8

USING HEADPHONESHeadphones are not supplied with this Player. You will require headphones fitted with a

3.5 mm diameter stereo plug and an impedance of 8-32 ohms. Plug your headphones into

the HEADPHONE JACK (#22) on the rear of the unit for private listening. After plugging in

the headphones, the speakers will be automatically disconnected.

WARNING : ALWAYS LOWER THE VOLUME LEVEL BEFORE PUTTING ON YOUR

HEADPHONES. OTHERWISE YOUR HEARING COULD BE DAMAGED.

CARE AND MAINTANCE1. Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be

used.

2. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.

3. Keep your unit away from heating appliances and sources of electrical noise such

as fluorescent lamps or motors.

4. If drop-outs or interruptions occur in the music during

CD play, or if the CD fails to play at all, its bottom

surface may require cleaning. Before playing, wipe the

disc from the center

outwards with a good soft

cleaning cloth.

TECHNICAL SPECIFICATIONAC Power Requirement

……AC / DC adapter (included)

Input AC 100 - 240V

~Output DC 9V 800mA

……………...CD Section…………….Batteries UM2 x 6 PCS for battery operation

Support Music CDs format

MP3 / WMA / VCD / DVD not Support

RMS 1.0 W x 2

87.5~108 MHz

For music share with mobile.

Bluetooth version : 3.0……...FM Radio Section

………..Bluetooth Section………...Audio SectionE-9

TROUBLE SHOOTINGIf you experience difficulties in the use of this music system, please check the following

or call 1-800-777-5331 for Customer MPOSSIBLESOLUTIONPower adapter connect unstable Reconnect adapter

Battery no power Replace all batteries with

No sound

new ones.

Plugged the phone Remove the phone deviceVolume set at minimum Increase Volume.

Noise or sound distorted Wire antenna is not extended Extend wire antenna

on FM broadcastUnit not in RADIO (FM) mode

Slide FUNCTION Selector

Radio no sound

to FM position.

Station not unstable Retune the station again

Unit not in CD mode Slide FUNCION Selector

to CD position.

CD is installed incorrectly Insert CD with label side

up.

CD player will not play

Batteries become exhausted Replace all batteries with

new ones.

It the CD is self-compiled, the Use better quality blank

media used may not be media and retest.

compatible with the player.

Disc is dirty or CD with clean cloth

or use another disc.

Dirty or defective disc Clean or replace the

defective disc

CD skips while playingDirty pick up lens Use a CD-lens cleaning

disc to clean the lens

Player is subject to excessive Relocate the player away

shock or vibrationfrom shock or vibration

CD skips while playingBatteries become exhaustedReplace all batteries with

new ones.

Unit not in AUX mode Press SOURCE Button to

select AUX mode.

Aux in no soundAux cable connect unstable Reconnect again

Unit not in function modeSlide FUNCTION Selector

Bluetooth no operation

to position.

Bluetooth connect

unstableReconnect again

SPECTRA GREEN NOTICEAt Spectra, environmental and social responsibility is a core

value of our business. We are dedicated to continuous

implementation of responsible initiatives with an aim to

conserve and maintain the environment through responsible

recycling.

Please visit us at / for more information on Spectra’s

green initiatives or to find a recycler in your area.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,

Inc. and any use of such marks by Spectra Merchandising Intl, Inc. is under license. Other

trademarks and trade names are those of their respective owners.E-10

SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from

defective materials or

factory workmanship for a period of 90 days from the date of

original customer purchase and provided the product is utilized within the U.S.A. This

warranty is not assignable or transferable. Our obligation under this warranty is the

repair or replacement of the defective unit or any part thereof, except batteries, when

it is returned to the SPECTRA Service Department, accompanied by proof of the date of

original consumer purchase, such as a duplicate copy of a sales receipt.

You must pay all shipping charges required to ship the product to SPECTRA for warranty

service. If the product is repaired or replaced under warranty, the return charges will be at

SPECTRA’s expense. There are no other express warranties other than those stated

herein.

This warranty is valid only in accordance with the conditions set forth below:

1. The warranty applies to the SPECTRA product only while:

a. It remains in the possession of the original purchaser and proof of purchase is

demonstrated.

b. It has not been subjected to accident, misuse, abuse, improper service, usage outside

the descriptions and warnings covered within the user manual or non-SPECTRA

approved modifications.

c. Claims are made within the warranty period.

2. This warranty does not cover damage or equipment failure caused by electrical wiring

not in compliance with

electrical codes or SPECTRA user manual specifications,

or failure to provide reasonable care and necessary maintenance as outlined in the

user manual.

3. Warranty of all SPECTRA products applies to residential use only and is void when

products are used in nonresidential environment or installed outside the United

States.

This warranty gives you specific legal rights, and you may also have other rights which

vary from state to state. TO OBTAIN SERVICE please remove all batteries (if any) andpack the unit carefully and send it freight prepaid to SPECTRA at the address shown below.

IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD

shown above, please

include a proof of purchase (dated cash register receipt) so that we may establish your

eligibility for warranty service and repair of the unit without cost. Also include a note with a

description explaining

how the unit is defective. A customer service representative may

need to contact you regarding the status of your repair, so please include your name,

address, phone number and email address to expedite the process.

IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $25.00to cover the cost of repair, handling and return postage. All out of warranty returns must be

sent prepaid.

It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at

**********************************************************************. In some

cases the model you have may be discontinued, and SPECTRA reserves the right to offer

alternative options for repair or replacement.

SPECTRA MERCHANDISING INTERNATIONAL, INC.

4230 North Normandy Avenue,

Chicago, IL60634, USA. 1-800-777-5331

To register your product, visit the link on the website below to enter your information.

/

0614 Made in China

E-11

本文标签： 系统播放器音乐蓝牙用户手册