k8s使用时无法ping通服务器From IP地址 icmp_seq=1 Destination Host Unreachable
天行健,君子以自强不息;地势坤,君子以厚德载物。 每个人都有惰性,但不断学习是好好生活的根本,共勉! 文章均为学习整理笔记,分享记录为主,如有错误请指正,共同学习进步。 文章目录 描述问题分析与解决描述 在搭建k8s时,三个虚拟机配置hs
正点原子Linux板 imx6ull,网口ping不通:From 192.168.8.20 icmp_seq=1 Destination Host Unreachable问题
最近在学习Linux开发时,发现网口eth0能够ping通,eth1无法ping通,显示From 192.168.8.20 icmp_seq1 Destination Hos
Choose a destination with a supported architecture in order to run on this device.
通常出现这个问题的原因是以前的老项目在新版本的xcode中打开时会出现为这个问题。 郁闷了一段时间, 在网上也没有找到合适的解决方案, 后来发现其实是这个提示过于误导。大部分人看到这个提示&
提示Destination port unreachable
局域网有机子若干台,其中一台犯病.配制相同,只是昨天搬了下位置. 症状:能正常获得IP地址,DNS地址.能正常访问局域网,已经在局域网内成功复制过文件. 但是无法正常访问网站.一直是找不到网站. ping 局域网网关正常 192.168.
解决Xcode中运行出现"cannot run using the selected device"、"cannot run on the selected destination"或
[iOS的解决Xcode中运行出现“不能运行使用选定的设备”,“不能运行在选定的目标”或无反应问题 问题 当使用的Xcode4 Xcode cannot run using the selected device. cannot run
编译错误“The run destination My Mac 64-bit is not valid for Running the scheme '***',解决办法
1. iOS APP Project or Mac APP Project编译错误提示: “The run destination My Mac 64-bit is not valid for Running the
关于ORA-12543: TNS:destination host unreachable的案例(37天)
今天在给几个库做映射的时候,用tnsping,有一个库老是有问题,在客户端配置tnsping NFTTESTUsed TNSNAMES adapter to resolve
rename ,destination host unreachable
Linux 网卡重命名:eth0 vs eth0_rename 用udev修改网卡标示Ubuntu修改网卡标识,例如我的程序是绑定网卡标识(eth0࿰
JUNIPER SRX双ISP部署Destination-nat配置实验1.0
企业网环境中,客户通常会部署多条运营商线路。同一台服务器的不同端口会通过不同运营商线的线路发布出去。也有客户会问:无法通过ISP2的地址管理设备。我们通过简单的路由实例就可以实现这一要求。 实验拓扑࿱
Choose a destination with a supported architecture in order to run on this device
Choose a destination with a supported architecture in order to run on this device. 尼玛的这个问题折磨过我两次,公司用的是最新4.4版
个别网页打不开,顺便学习一下ping解决问题
 什么是DNS呢?这个在网页打不开的各种原因中提到过,大体上讲,就是域名解析系统。你可以把它理解成一个翻译器。DNS故障可以先
github可以ping通,但是打不开网页
1、利用网址查看github的ipGitHub: Where the world builds software · GitHub (ipaddress)https:ipaddresswebsitegithub 2、利用站长工具搜索
能ping通,但打不开网页解决方案
1、打开cmd窗口,netsh winsock reset。重启电脑即可(我是这种方法解决的)。 2、刷新DNS: ipconfig flushdns, ipconfig displaydn
Ubuntu能ping通百度但不能打开网页的解决办法
能ping通说明能正常连接网络,所以问题出在的域名解析上。 打开右上角的 设置 → 网络 → 网络代理 将手动改成 已禁用 问题解决 艹
宝塔Linux面板页面打不开
首先,我用的是阿里云的ECS,版本是centOS7。 解决方案 放行端口: 在宝塔的安装说明里写了关于阿里云服务器的端口配置: 所以在阿里云的安全组
非uefi模式安装linux,UEFI启动模式下安装Ubuntu 16.04教程
前言 最近常帮人安装Ubuntu,也算积累了一些经验。这篇博文主要谈一谈如何在UEFI启动模式下正确安装Ubuntu 16.04,以形成Windows 10和Ubuntu 16.04的双系统。 随着UEFI的普及,现在新出的笔记本电脑几乎都
【Linux】使用 UEFI 的操作系统启动过程
参考书籍《Beyond BIOS: Developing with the Unified Extensible Firmware Interface Third Edition》 文章目录 一、从 UEFI 到 OS Run Time1.
linux要uefi启动mbr,uefi可以引导mbr吗
注意事项: 1、硬盘必须是GPT格式,必须是win7 64位系统下载,UEFI不支持32位系统。 备注:严谨地说,UEFI也可以引
linux修复uefi启动文件夹,修复UEFI模式下Manjaro Linux启动问题
上周在更新Manjaro Linux的时候误触了电源键,导致内核更新了一半系统强制关机,重启时正常进入grub但无法正常引导进入系统。 由于不想重装系统(一大堆环境和工具的配置还是相当繁琐的)&a
uefi启动linux过程_Linux UEFI与备份还原(引导修复)
这篇文章主要介绍UEFI启动流程、Linux系统下的备份还原以及grub引导修复。 UEFI相关知识 UEFI启动要求硬盘上有一个特殊的分区——EFI系统分区。它是FAT32格式带有efi、boot标志的分区,大小一般在300MB到500M
发表评论