admin管理员组文章数量:1621485
2024年5月2日发(作者:)
毕业设计(论文)任务书
设计(论文)题目:单片机控制液晶显示系统
设计(论文)主要内容和要求:
1. 掌握89C52单片机工作原理、软硬件资源
2. 掌握中文液晶显示屏的结构及工作原理
3. 完成系统硬件设计
4. 完成系统软件设计
摘 要
本文主要对AT89C52控制的液晶显示系统进行了研究。文章首先
对单片机AT89C52的结构、功能、特点进行了简要的介绍;然后介绍了
液晶显示控制器KS0108的结构功能,并对液晶模块LG128643的结构、
功能做了详细的说明;之后,着重分析了液晶显示系统的硬件实现方案,
包括键盘的设计、液晶显示接口的设计。文章的最后提出系统的软件设
计方案,设计了各个功能模块的软件流程图。
关键词:单片机AT89C52 控制器KS0108 液晶模块LG128643
ABSTRACT
This paper is main the LCD that control to the AT89C52
manifestation the system proceeded the research. The article preceded
the introduction of the synopsis to the construction, function,
characteristics of the single a machine AT89C52 first. Then introduced
the LCD show the construction function of the controller KS0108, And
did the expatiation to the construction, function of the LCD mold a
LG128643; After, emphasized to analyze the LCD show that the , LCD
manifestation that include the keyboard connects design. The article puts
forward the software design project of the system finally, designed the
software flow chart of the each function mold piece.
Key words: Single a machine AT89C52、controller KS0108、LCD mold a
LG128643
版权声明:本文标题:(完整版)基于单片机的液晶显示系统毕业设计论文 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://www.elefans.com/dongtai/1714587258a412655.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论