Raspberry Pi无法启动Windows 10 IOT

本文介绍了Raspberry Pi无法启动Windows 10 IOT的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！ 问题描述

我刚买了一张SanDisk 32GByte micro SD卡，它是10级。我找不到16 GB的卡，所以这就是我的用途。我部署了Flash.ffu文件，我可以看到SD卡上的分区在哪里。我正好弹出了卡片。 我把它放在Raspberry Pi中，我得到一个多色显示屏，左上方的红色底部左边是蓝色，但卡片上从未显示过我的标识，而Raspberry Pi中的ACT灯没有点亮。它的行为就像它没有启动。我有另一张SD卡，我用的是，不是10级，但它有Rasperian和Pi靴子很好。在这一点上我有点沮丧。我做错了什么？

I have just purchased a SanDisk 32GByte micro SD card that is Class 10. I could not find a 16 GByte card so this is what I went with. I deployed the Flash.ffu file and I can see where the partitions are made on the SD card. I ejected the card properly. I put it in the Raspberry Pi and I get a multi colored display with the top left red bottom left blue but the card never shows me a windows logo and the ACT light in the Raspberry Pi is not lit up. It acts like it is not booting. I have another SD card that I use that is not Class 10 but it has Rasperian and the Pi boots fine with that one. I am a little frustrated at this point. What am I doing wrong?

推荐答案

嗨Jerry，

Hi Jerry,

在Rpi2的第一次启动时，可能需要一些时间来设置和初始化。 所以，如果你还没有我给它10到20分钟，只是为了看看是否只能解决你的问题。

On the very first boot of the Rpi2 it can take a little while to setup and initialize things. So if you haven’t already I’d give it 10 to 20 minutes just to see if that alone resolves the problem for you.

您可能遇到的另一个问题是官方建议使用8或16 GB的SD卡。 非正式地我听说人们使用更大尺寸的卡而没有任何问题所以不要指望这应该是问题，但如果可以，你可能想尝试不同品牌的卡片，看看是否这有帮助。

The other problem you could be encountering is the official recommendation was to use either an 8 or 16 GB SD card. Unofficially I’ve heard of folks using larger sized cards without any problems so don’t expect that should be the issue, but if you can you might want to try a different brand of card to see if that helps.