嗨.
我正在尝试为Visual Studio 2012 Update 2环境设置测试代理和控制器.我有两台机器,一台用于代理程序主机,另一台安装了控制器.两台机器都运行服务器2008 R2. 安装似乎 为了正常工作,服务在域管理员帐户下运行,但是当我将代理连接到控制器时,它卡在了验证测试代理是否能够连接到测试控制器"这一步骤上. ;
我遵循了疑难解答指南,但这不能解决我的问题. 防火墙在两台计算机上均处于关闭状态.我可以通过所使用的端口从代理程序计算机远程登录到控制器计算机,但是通信似乎失败了.另外, 当我在Visual Studio中调出管理测试控制器"时,代理计算机会显示在列表中,但其状态为已断开连接".
解决方案
您好,
感谢您的信息.
由于您已将VS2012升级到VS2012 Update2,因此建议您下载此更新并与测试控制器和测试代理一起使用以检查结果: www.microsoft/zh-cn/download/details.aspx?id = 38186
如果仍然没有帮助,请明确指出问题所在:
最好的问候,
Hi.
I am trying to setup a test agent and controller for a Visual Studio 2012 update 2 environment. I have two machines, one for the agent host, the other the controller is installed. Both machines are running server 2008 R2. The installs seem to be working correctly, the services are running under a domain admin account, but when I go to connect my agent to the controller, it gets stuck on the step "Verifying that the test agent is able to connect to the test controller."
I have followed the troubleshooting guide and this didn't fix my issue. The firewall is off on both machines. I can telnet from the agent machine to the controller machine across the port being used, but the communication seems to be failing. Additionally, when I bring up the Manage Test Controllers in visual studio, the agent machine shows up in the list, but the status of it is "Disconnected".
Any help would be appreciated, thanks.
解决方案Hello,
Thank you for your post.
Since you have upgrade VS2012 to VS2012 Update2, I suggest that you download this update and apply with test controller and test agent to check the result: www.microsoft/en-us/download/details.aspx?id=38186
If still no help, just to make the issue clearly:
Best regards,
更多推荐
Visual Studio 2012 Update 2测试代理安装问题
发布评论