dotnet发布包含额外的文件

编程入门行业动态更新时间:2024-10-26 10:28:21

本文介绍了dotnet发布包含额外的文件的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！问题描述

我有一个netcore应用程序取决于我的自定义项目.因为我无法直接引用它，所以我编写了postbuildevents，这些事件会将我的文件复制到输出中:

I have a netcore application depends on my custom project. Because I cannot reference it directly, I have written postbuildevents that are copying my files to output:

xcopy "$(SolutionDir)Ethereum.Contracts\bin\$(ConfigurationName)\*.abi" "$(TargetDir)" /Y /I xcopy "$(SolutionDir)Ethereum.Contracts\bin\$(ConfigurationName)\*.bin" "$(TargetDir)" /Y /I

在我构建和运行项目时，它工作正常，但是在运行 publish 命令时，它不包含这些文件.

It works fine when I build and run project, but when run publish command it doesn't include these files.

该怎么办?我也尝试过这种方法，但是 AddPayloadsFolder 没有被调用.

How can it be done? I tried this approach as well but AddPayloadsFolder doesn't get called.

我的 csproj :

<Project Sdk="Microsoft.NET.Sdk"> <PropertyGroup> <OutputType>Exe</OutputType> <TargetFramework>netcoreapp2.0</TargetFramework> </PropertyGroup> <ItemGroup> <ProjectReference Include="..\..\Dependencies\Dependencies.csproj" /> </ItemGroup> <ItemGroup> <None Update="appsettings.json"> <CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory> </None> <None Update="log4net.config"> <CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory> </None> </ItemGroup> <Target Name="PostBuild" AfterTargets="PostBuildEvent"> <Exec Command="xcopy "$(SolutionDir)Ethereum.Contracts\bin\$(ConfigurationName)\*.abi" "$(TargetDir)" /Y /I


xcopy "$(SolutionDir)Ethereum.Contracts\bin\$(ConfigurationName)\*.bin" "$(TargetDir)" /Y /I" /> </Target> <Target Name="AddPayloadsFolder" AfterTargets="AfterPublish"> <Exec Command="xcopy "$(TargetDir)\*.abi" "$(PublishDir)" /Y /I


xcopy "$(TargetDir)\*.bin" "$(PublishDir)" /Y /I" /> </Target> </Project>

推荐答案

启动 dotnet publish 命令时，未定义 $(SolutionDir)宏.结果，使用错误的源路径启动了 xcopy .

When you launch dotnet publish command, $(SolutionDir) macros is not defined. As result xcopy is launched with incorrect source path.

缺少解决方案宏的问题是此处所述，并且该问题仍处于打开状态状态.我不确定它是否会修复，因为 $(SolutionDir)是IDE特定的宏.

The issue with missing solution macros is described here and it's still in opened state. I'm not sure it will be ever fixed because $(SolutionDir) is IDE-specific macros.

要解决您的问题，您可以通过开关/p 将 $(SolutionDir)宏的值传递给 dotnet publish 命令:/p>

To fix your problem, you could pass the value for $(SolutionDir) macros to dotnet publish command via switch /p:

dotnet发布-c版本-r win-x64/p:SolutionDir ="D:\ projects \ SolutionDir"

dotnet publish -c Release -r win-x64 /p:SolutionDir="D:\projects\SolutionDir"

您还应该在 $(SolutionDir)宏之后添加反斜杠:

You should also add a backslash after $(SolutionDir) macros:

更新(关于 AddPayloadsFolder 目标):

AddPayloadsFolder 目标定义为

不会执行

，因为对于 dotnet publish 而言， AfterTargets 的正确值是 Publish ，而不是 AfterPublish .我尚未找到有关此事实的明确文档，但是在此问题

is not executed since the correct value of AfterTargets for dotnet publish is Publish, not AfterPublish. I have not found explicit documentation for this fact, however it is mentioned in this issue.

还可以考虑将用换行符分隔的多个 xcopy 命令替换为多个命令.当我最终执行了 AddPayloadsFolder 目标时，出现了由 \ r 分隔符附加到命令行引起的错误.

Also consider replacing several xcopy commands delimited by newline separator with multiple commands. When I got AddPayloadsFolder target finally executed, I got an error caused by \r delimiter appended to the command line.

总结以上所有内容，这里调整了 PostBuild 和 AddPayloadsFolder 目标:

Summarizing all of the above, here are adjusted PostBuild and AddPayloadsFolder targets:

更多推荐

dotnet发布包含额外的文件

本文发布于:2023-11-10 09:24:33，感谢您对本站的认可！

本文链接:https://www.elefans.com/category/jswz/34/1574992.html