关闭文件后CAD层变得不可见

本文介绍了关闭文件后CAD层变得不可见的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！ 问题描述

我有一个CAD文件，我已导入并调整了多个图层上的可见性，以降低文件的复杂性，然后我才能使Visio"转换"。文件。一旦它被转换，大多数层（墙壁，楼梯，厕所等）都显得很好。 但由于某种原因，所有的家具似乎都独立存在于一个单独的层上。值得注意的是，在CAD文件中，家具是几个不同层的一部分。我的颜色分配在转换过程中丢失了，所以我必须休息那些颜色。

I have a CAD file that i've imported and adjusted the visibility on several layers to reduce the complexity of the file before i have Visio "convert" the file. Once it's converted, most of the layers (walls, stairs, toilets, etc) all seem fine. But for some reason, all of the furniture seems to exist on a separate layer on its own. It's worth noting that on the CAD file, the furniture is part of several different layers. My color assignments are lost in the conversion process, so i then have to rest those colors.

我使用Visio插入文本框为每个工作站分配房间号/办公房。但是如果我保存文件然后关闭Visio，当我再次打开它时，家具就消失了。 Visio中的图层（不是CAD图层）表示图层可见并且切换该图层的可见性不会改变任何内容。这是一个很大的问题，因为有400个左右的房间，其中大约325个是隔间房间。所以没有家具层，拥有房间号码毫无意义。

I am using Visio to insert text boxes to assign room numbers to each workstation/office/room. But if i save the file and then close Visio, when i open it again, the furniture has disappeared. The layers in Visio (not the CAD layers) say the layer is visible and toggling the visibility of that layer doesn't change anything. This is a big problem because of the 400 or so rooms, about 325 of them are cubicle rooms. So without the furniture layer, it's pointless to have the room numbers.

我一直在争夺这个问题几个月，而且非常令人沮丧。我想如果我只是蹲下并立刻插入我的所有数字，我只需要将其打印成PDF并完成。但是现在它在编号中间的中间做了！任何帮助将不胜感激！

I've been battling this for a couple of months off and on and it's very frustrating. I thought if i just hunkered down and inserted all my numbers at once, i'd just push through to get it printed to a PDF and be done. But now it's doing it in the middle of working on the numbering! Any help would be greatly appreciated!

推荐答案

嗨克里斯米勒，

Hi Chris Miller,

是否有这个问题只出现在特定的CAD文件中？

Isthis problem only appearedin a specific CAD file?

首先，我建议您创建一个简单且类似的CAD文件，并检查是否会出现同样的问题。

First I suggest you create a simple and similar CAD file and check if you will get the same problem.

然后我建议您提供CAD文件，以便我可以在我的环境中测试此问题。

Then I suggest you provide the CAD file, so that I can test this problem in my environment.

您可以将此文件发送到我们的电子邮件地址： ibsofc@microsoft

You could send this file to our email address: ibsofc@microsoft

注意：请在电子邮件主题或正文中添加案例的URL 。

Note: Please add the URL of the case in the email subject or body.

我很乐意帮助你。