如何以编程方式触发NavigationLink出现

本文介绍了如何以编程方式触发NavigationLink出现的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！ 问题描述

我试图以编程方式在出现时触发NavigationLink，但在所有情况下，出现(iOS 13.3.1，Xcode 11.3.1)后，目标视图都会立即弹出.

I am trying to trigger a NavigationLink programmatically on appear but in all cases the destination view pops immediately after appearing (iOS 13.3.1, Xcode 11.3.1).

设置如下:ContentView有一个到DetailView1的NavigationLink，而后者又有一个到DetailView2的NavigationLink.我希望在DetailView1首次加载时自动触发DetailView1中的NavigationLink(在我的实际代码中，这将基于条件，但这与此处无关).

The setup is as follows: ContentView has a NavigationLink to DetailView1 which in turn has a NavigationLink to DetailView2. I would like the NavigationLink in DetailView1 to be triggered automatically when the DetailView1 first loads (in my actual code this would be based on a condition, but this is irrelevant here).

这是基本代码(没有自动行为):

This is the basic code (without automatic behaviour):

import SwiftUI struct ContentView: View { var body: some View { NavigationView { NavigationLink(destination: DetailView1()) { Text("Open Detail View 1") } .navigationBarTitle(Text("ContentView")) } } } struct DetailView1: View { @State private var isActive = false var body: some View { VStack { NavigationLink(destination: DetailView2(), isActive: $isActive) { EmptyView() } Button ("Open Detail View 2") { self.isActive = true } } .navigationBarTitle(Text("Detail View 1"), displayMode: .inline) } } struct DetailView2: View { var body: some View { Text("This is Detail View 2") .navigationBarTitle(Text("Detail View 2"), displayMode: .inline) } }

我的第一个方法是在DetailView1中将 isActive 设置为true:

My first approach was to set isActive to true at its declaration in DetailView1:

@State private var isActive = true

如预期的那样，会触发NavigationLink，但是DetailView2出现后会立即弹出.

As expected, the NavigationLink is triggered, but DetailView2 is popped immediately after appearing.

我还(或者)尝试在 .onAppear

.navigationBarTitle(Text("Detail View 1"), displayMode: .inline) .onAppear(){ self.isActive = true }

但是结果是相同的.

实际可行的方法是将 isActive 设置为true至少延迟0.75秒，我认为这不是可接受的解决方法.

What actually worked was delaying setting isActive to true by at least 0.75 seconds, which in my opinion is not an acceptable workaround.

.navigationBarTitle(Text("Detail View 1"), displayMode: .inline) .onAppear(){ DispatchQueue.main.asyncAfter(deadline: .now() + 0.75) { self.isActive = true } }

这是一个错误还是有实现预期效果的方法?

Is this a bug or is there a way to achieve the desired effect?

推荐答案

使用Xcode 11.4/iOS 13.4，可以使用 .toggle()正常工作，如下所示

With Xcode 11.4 / iOS 13.4 works properly using .toggle(), like below

.navigationBarTitle(Text("Detail View 1"), displayMode: .inline) .onAppear { self.isActive.toggle() }