需要帮助将RAM从256MB增加到512MB

本文介绍了需要帮助将RAM从256MB增加到512MB的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！ 问题描述

您好，

我在DM3730平台上使用WinCE 7和TI BSP。我非常需要帮助修改BSP，将RAM大小从256MB增加到512MB。我在旧帖子中解释 social.msdn.microsoft/Forums/en-US/winembplatdev/thread/a1c8901f-6fda-4a07-a085-021e71f55b7c 我做了什么没有成功并在那里寻求帮助但是没有得到任何回应。如上所述，我尝试使用OEMRamTable动态将256MB的RAM添加到g_oalAddressTable中指定的数量，但是我的主板在跳入Eboot后挂起。

I am using WinCE 7 and TI BSPon DM3730 platform. I badly need help in modifying the BSP to increase RAM size from 256MB to 512MB. I explain in an old post social.msdn.microsoft/Forums/en-US/winembplatdev/thread/a1c8901f-6fda-4a07-a085-021e71f55b7cwhat I did without success and asked for help there but did not get any response. As explained, I attempted to use OEMRamTable to dynamically add 256MB of RAM to the amount specified in g_oalAddressTable but my board hangs after jumping into the Eboot.

我也尝试过在addrtab_cfg.inc中实现OEMDeviceTable，如下所示：

I also tried toimplement OEMDeviceTable in addrtab_cfg.inc as below:

EXPORT g_oalAddressTable [DATA] 导出 g_oalEbootAddressTable [DATA] g_oalDeviceTable DCD 0xA5000000,0x150000， 0x1000000， 0 ; CS5，LAN9115 DCD 0xA6000000,0x480000， 0x1000000， 0 ; L4核心/唤醒注册器 DCD 0xA7000000,0x490000， 0x0100000， 0 ; L4外围设备 DCD 0xA7100000,0x680000， 0x1000000， 0 ; L3寄存器 DCD 0xA8100000,0x6C0000， 0x1000000， 0 ;短信登记册为 DCD 0xA9100000,0x6D0000， 0x1000000， 0 ; SDRC注册为 DCD 0xAa100000,0x6E0000， 0x1000000， 0 ; GPMC注册号 DCD 0xAb100000,0x402000， 0x0100000， 0 ; 64KB SRAM DCD 0xAb200000,0x5C0000， 0x1000000， 0 ; IPSS互连 DCD 0xAC200000,0x000000， 0x0100000， 0 ; ROM DCD 0xAC300000,0x080000， 0x0100000， 0 ; NAND寄存器（FIFO） DCD 0x00000000,0x000000， 0， 0 ;表格结尾

EXPORT g_oalAddressTable[DATA] EXPORT g_oalEbootAddressTable[DATA] g_oalDeviceTable DCD 0xA5000000, 0x150000, 0x1000000,0 ; CS5, LAN9115 DCD 0xA6000000, 0x480000, 0x1000000,0 ; L4 Core/Wakeup registers DCD 0xA7000000, 0x490000, 0x0100000,0 ; L4 Peripheral DCD 0xA7100000, 0x680000, 0x1000000,0 ; L3 registers DCD 0xA8100000, 0x6C0000, 0x1000000,0 ; SMS registers DCD 0xA9100000, 0x6D0000, 0x1000000,0 ; SDRC registers DCD 0xAa100000, 0x6E0000, 0x1000000,0 ; GPMC registers DCD 0xAb100000, 0x402000, 0x0100000,0 ; 64KB SRAM DCD 0xAb200000, 0x5C0000, 0x1000000,0 ; IPSS interconnect DCD 0xAC200000, 0x000000, 0x0100000,0 ; ROM DCD 0xAC300000, 0x080000, 0x0100000,0 ; NAND Registers (FIFO) DCD 0x00000000, 0x000000,0,0 ; end of table

; ----------------------------------- ------------------------------------------- ;表格格式：缓存地址，实际地址，大小

;------------------------------------------------------------------------------ ; Table format: cached address, physical address, size

g_oalAddressTable DCD CE_NEW_MAPPING_TABLE，g_oalDeviceTable，0 $ DCD 0x80000000,0x800000,512， 0  ;; SDRAM DCD 0x00000000,0x00000000， 0， 0&NBSP ;;表格结束 g_oalEbootAddressTable

g_oalAddressTable DCDCE_NEW_MAPPING_TABLE, g_oalDeviceTable, 0 DCD 0x80000000, 0x800000, 512,0; SDRAM DCD 0x00000000, 0x00000000,0, 0; end of table g_oalEbootAddressTable

DCD 0x80000000,0x80000000,256 ; SDRAM DCD 0x95000000,0x15000000， 16 ; CS5，LAN9115 DCD 0x96000000,0x48000000， 16 ; L4核心/唤醒注册器 DCD 0x97000000,0x49000000， 1 ; L4外围设备 DCD 0x97100000,0x68000000， 16 ; L3寄存器 DCD 0x98100000,0x6C000000， 16 ;短信登记册为 DCD 0x99100000,0x6D000000， 16 ; SDRC注册为 DCD 0x9a100000,0x6E000000， 16 ; GPMC注册号 DCD 0x9b100000,0x40200000， 1 ; 64KB SRAM DCD 0x9b200000,0x5C000000， 16 ; IPSS互连 DCD 0x9C200000,0x00000000， 1 ; ROM DCD 0x9C300000,0x08000000， 1 ; NAND寄存器（FIFO） DCD 0x00000000,0x00000000， 0 ;表的结尾

DCD 0x80000000, 0x80000000, 256 ; SDRAM DCD 0x95000000, 0x15000000, 16 ; CS5, LAN9115 DCD 0x96000000, 0x48000000, 16 ; L4 Core/Wakeup registers DCD 0x97000000, 0x49000000, 1 ; L4 Peripheral DCD 0x97100000, 0x68000000, 16 ; L3 registers DCD 0x98100000, 0x6C000000, 16 ; SMS registers DCD 0x99100000, 0x6D000000, 16 ; SDRC registers DCD 0x9a100000, 0x6E000000, 16 ; GPMC registers DCD 0x9b100000, 0x40200000, 1 ; 64KB SRAM DCD 0x9b200000, 0x5C000000, 16 ; IPSS interconnect DCD 0x9C200000, 0x00000000, 1 ; ROM DCD 0x9C300000, 0x08000000, 1 ; NAND Registers (FIFO) DCD 0x00000000, 0x00000000, 0 ; end of table

我创建了g_oalEbootAddressTable以在Eboot startup.s和Eboot mmu.c的OALPAtoVA和OALVAtoPA函数中使用，而不是使用g_oalAddressTable 尽管如此，从Xloader跳到Eboot后我得到了同样的挂起。

I created g_oalEbootAddressTable to use in Eboot startup.s and in functions OALPAtoVA and OALVAtoPA of Eboot mmu.c instead of using g_oalAddressTable. Nonetheless, I got the same hang after jumping from Xloader to the Eboot.

请你给我一些详细的步骤来告诉我我错过了什么？

Would you please give me some detailed steps to do this or tell me what I am missing?

非常感谢你的帮助。

Luan

Luan Le

推荐答案

修改FILES文件夹下的config.bib文件例如......（仅供参考......）

Modify your config.bib file under FILES folder for eg .. (only for your reference ... )

ARGS 84000000 00001000保留; 4K NK 84001000 047FF000 RAMIMAGE; 72MB - 4K DISPLAY 88800000 01000000保留; 16MB CMEM_DSP 89800000 02800000保留; 40 MB RAM 8C000000 12200000 RAM ; 290MB

ARGS 84000000 00001000 RESERVED ; 4K NK 84001000 047FF000 RAMIMAGE ; 72MB - 4K DISPLAY 88800000 01000000 RESERVED ; 16MB CMEM_DSP 89800000 02800000 RESERVED ; 40 MB RAM 8C000000 12200000 RAM ; 290MB

修改你的"g_oalAddressTable" INC文件夹下的addrtab_cfg.inc，例如......（仅供参考）

Modify your "g_oalAddressTable" addrtab_cfg.inc under INC folder for eg ... (For your reference only)

DCD 0x84000000,0x80000000,418 ; SDRAM DCD 0x9E200000,0x5C000000， 16 ; L3互连 DCD 0x9F200000,0x40200000， 1 ; 62KB SRAM DCD 0x9F300000,0x6E000000， 1 ; GPMC注册机构 DCD 0x9F400000,0x6D000000， 1 ; SDRC注册为 DCD 0x9F500000,0x6C000000， 1 ;短信登记册为 DCD 0x9F600000,0x68000000， 1 ; L3寄存器 DCD 0x9F700000,0x49000000， 1 ; L4外围设备 DCD 0x9F800000,0x48000000， 4 ; L4核心/唤醒注册器 DCD 0x9FC00000,0x10000000， 1 ; CS0， DCD 0x9FD00000,0x20000000， 1 ; CS5，LAN9115 DCD 0x9FE00000,0x30000000， 1 ; CS3 DCD 0x9FF00000,0x31000000， 1 ; CS4 DCD 0x00000000,0x00000000， 0 ;表的结尾

DCD 0x84000000, 0x80000000, 418 ; SDRAM DCD 0x9E200000, 0x5C000000, 16 ; L3 interconnect DCD 0x9F200000, 0x40200000, 1 ; 62KB SRAM DCD 0x9F300000, 0x6E000000, 1 ; GPMC registers DCD 0x9F400000, 0x6D000000, 1 ; SDRC registers DCD 0x9F500000, 0x6C000000, 1 ; SMS registers DCD 0x9F600000, 0x68000000, 1 ; L3 registers DCD 0x9F700000, 0x49000000, 1 ; L4 Peripheral DCD 0x9F800000, 0x48000000, 4 ; L4 Core/Wakeup registers DCD 0x9FC00000, 0x10000000, 1 ; CS0, DCD 0x9FD00000, 0x20000000, 1 ; CS5, LAN9115 DCD 0x9FE00000, 0x30000000, 1 ; CS3 DCD 0x9FF00000, 0x31000000, 1 ; CS4 DCD 0x00000000, 0x00000000, 0 ; end of table

您不能使用完整的512 MB，因为您需要为I / O映射一些内存，因为它已完成以上。

You cannot use the full 512 MB because you need to have some memory to be mapped for I/O's as it is done above.

您已经创建了"g_oalEbootAddressTable" 。我不确定这是否会对你有所帮助。我告诉过你我为我做过的事情......

You have created "g_oalEbootAddressTable" . I am not sure if this will help you or not. I have told you something that i did and worked for me ...

可能你可以探索并告诉我们任何其他方式来做同样的事。

May be you can explore and let us know any other way to do the same.

尝试了解我的设置