百度文库的地址:http://wenku.baidu/view/1a8fc4baa26925c52cc5bff2#
其中有部分是参考网上资料。
1、Libpcap介绍
Libpcap是Packet Capture Library的英文缩写,即数据包捕获函数库。该库提供的C函数接口用于捕获及格过指定网络接口的数据包,该接口是被设为混杂模式。大多数网络监控软件都以它为基础,其提供的接口函数实现和封装了与数据包截获相关的过程。Libpcap提供了用户级别的网络数据包捕获接口,并充分考虑到引用程序的可移植性,可以在绝大多数类unix平台下工作。主要功能:
l 数据包捕获:捕获流经网卡的原始数据包
l 自定义数据包发送:构造任何格式的原始数据包
l 流量采集与统计:采集网络中的流量信息
l 规则过滤:提供自带规则过滤功能,按需要选择过滤规则
绝大多数的现代操作系统都提供了对底层网络数据包捕获的机制,在捕获机制之上可以建立网络监控(Network Monitoring)应用软件。网络监控也常简称为sniffer,其最初的目的在于对网络通信情况进行监控,以对网络的一些异常情况进行调试处理。但随着互连网的快速普及和网络攻击行为的频繁出现,保护网络的运行安全也成为监控软件的另一个重要目的。例如,网络监控在路由器,防火墙、入侵检查等方面使用也很广泛。本文分析了Libpcap在linux下的源代码实现,其中重点是linux的底层包捕获机制。
2、Libpcap的安装
Libpcap的下载地址: http://www.tcpdump/ 然后切换到下载的目录,解压压缩文件,配置,编译,安装。其命令如下:
cd ****
tar zxvf ****
./configure
Make
Make install
配置中如果出现错误,检查是否安装了所有的依赖包bison、m4、GNU、flex以及libpcap-dev。在运行的时候,是需要root权限的。
3、Libpcap工作原理
作为捕获网络数据包的库,它是一个独立于系统的用户级的API接口,为底层网络检测提供了可移植的框架。从广义的角度上看,一个包捕获机制包含三个主要部分:最底层是针对特定操作系统的包捕获机制,最高层是针对用户程序的接口,第三部分是包过滤机制。不同的操作系统实现的底层包捕获机制可能是不一样的,但从形式上看大同小异。数据包常规的传输路径依次为网卡、设备驱动层、数据链路层、网络层、传输层、应用层。而包捕获机制是在数据链路层增加一个旁路处理,对发送和接收到的数据包做过滤、缓冲等相关处理,最后直接传递到应用程序。值得注意的是,包捕获机制并不影响操作系统对数据包的网络栈处理。对用户程序而言,包捕获机制提供了一个统一的接口,使用户只需要简单的调用若干函数就能获得所期望的数据包。这样一来,针对特定操作系统的捕获机制对用户透明,使用户程序有比较好的可移植性。包过滤机制是对所捕获到的数据包根据用户的要求进行筛选,最终只把满足过滤条件的数据包传递给用户程序。如图1所示:
图1、包捕获机制
Libpcap源代码由20多个C文件构成,但在Linux系统下并不是所有文件都用到。可以通过查看命令make的输出了解实际所用的文件。本文所针对的Libpcap版本号为1.6.2
网络类型为常规以太网。Libpcap应用程序从形式上看很简单,其程序框架如图2所示:
图2、程序框架
在上面的流程中,通过查找网络设备,打开网络设备,获取网络参数,捕获数据包等操作简单的描述了一个抓包的流程。
4、函数功能介绍
4.1查找网络设备
Libpcap程序的第一步通常是在系统中找到合适的网络设备。网络接口在Linux网络体系中式一个很重要的概念,它是对具体网络硬件设备的一个抽象,在它的下面是具体的网卡驱动程序,而其上则是网络协议层。Linux中最常见的接口设备名eth0和lo。Lo称为回路设备,是一种逻辑意义上的设备,其主要目的是为了调试网络程序之间的通讯功能。Eth0对应实际的物理网卡,在真实网络环境下,数据包的发送和接收都要通过eth0。如果计算机有多个网卡,则还可以有更多的网络接口,如eth1,eth2等等。调用命令ifconfig可以列出当前所有活跃的接口及相关信息,注意对eth0的描述中技有物理网卡的MAC地址,也有网络协议的IP地址。查看文件/proc/net/dev也可以获得接口的信息。
Libpcap中检查网络设备中主要使用到的函数如下:
char * pcap_lookupdev(char * errbuf)
//上面这个函数返回第一个合适的网络接口的字符串指针,如果出错,则errbuf存放出错信息字符串,errbuf至少应该是PCAP_ERRBUF_SIZE个字节长度的
char *
pcap_lookupdev(errbuf)
register char *errbuf;
{
pcap_if_t *alldevs;
/* for old BSD systems, including bsdi3 */
#ifndef IF_NAMESIZE
#define IF_NAMESIZE IFNAMSIZ
#endif
static char device[IF_NAMESIZE + 1];
char *ret;
if (pcap_findalldevs(&alldevs, errbuf) == -1)
return (NULL);
if (alldevs == NULL || (alldevs->flags & PCAP_IF_LOOPBACK)) {
/*
* There are no devices on the list, or the first device
* on the list is a loopback device, which means there
* are no non-loopback devices on the list. This means
* we can't return any device.
*
* XXX - why not return a loopback device? If we can't
* capture on it, it won't be on the list, and if it's
* on the list, there aren't any non-loopback devices,
* so why not just supply it as the default device?
*/
(void)strlcpy(errbuf, "no suitable device found",
PCAP_ERRBUF_SIZE);
ret = NULL;
} else {
/*
* Return the name of the first device on the list.
*/
(void)strlcpy(device, alldevs->name, sizeof(device));
ret = device;
}
pcap_freealldevs(alldevs);
return (ret);
}
pcap_findalldevs_interfaces(alldevsp, errbuf)
//获取常规的网络接口
Libpcap调用上面的pcap_lookupdev()函数获得可用网络接口的设备名。首先利用函数pcap_findalldevs_interfaces()查找网络设备接口,其部分源码如下:
/*
* Create a socket from which to fetch the list of interfaces,
* and from which to fetch IPv4 information.
*/
fd4 = socket(AF_INET, SOCK_DGRAM, 0);
if (fd4 < 0) {
(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
"socket: %s", pcap_strerror(errno));
return (-1);
}
//创建socket套接字,为后面的数据传输。
/*
* How many entries will SIOCGLIFCONF return?
*/
ifn.lifn_family = AF_UNSPEC;
ifn.lifn_flags = 0;
ifn.lifn_count = 0;
if (ioctl(fd4, SIOCGLIFNUM, (char *)&ifn) < 0) {
(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
"SIOCGLIFNUM: %s", pcap_strerror(errno));
(void)close(fd6);
(void)close(fd4);
return (-1);
}
/*
* Get the entries.
*/
ifc.lifc_len = buf_size;
ifc.lifc_buf = buf;
ifc.lifc_family = AF_UNSPEC;
ifc.lifc_flags = 0;
memset(buf, 0, buf_size);
if (ioctl(fd4, SIOCGLIFCONF, (char *)&ifc) < 0) {
(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
"SIOCGLIFCONF: %s", pcap_strerror(errno));
(void)close(fd6);
(void)close(fd4);
free(buf);
return (-1);
}
利用ioctl函数,获取所有的设备名。保存到*alldevsp指针的入口参数里面。在pcap_lookupdev函数的最后通过使用函数strlcpy(device, alldevs->name, sizeof(device))将上面找到的设备名复制给device。最后返回给调用程序。
/* libpcap 自定义的接口信息链表 [pcap.h] */
struct pcap_if
{
struct pcap_if *next;
char *name; /* 接口设备名 */
char *description; /* 接口描述 */
/*接口的 IP 地址, 地址掩码, 广播地址,目的地址 */
struct pcap_addr addresses;
bpf_u_int32 flags; /* 接口的参数 */
};
网络设备
当设备找到后,下一步工作就是打开设备以准备捕获数据包。Libpcap的包捕获是建立在具体的操作系统所提供的捕获机制上,而Linux系统随着版本的不同,所支持的捕获机制也有所不同。
2.0 及以前的内核版本使用一个特殊的socket类型SOCK_PACKET,调用形式是socket(PF_INET, SOCK_PACKET, int protocol),但 Linux 内核开发者明确指出这种方式已过时。Linux 在 2.2及以后的版本中提供了一种新的协议簇 PF_PACKET 来实现捕获机制。PF_PACKET 的调用形式为 socket(PF_PACKET, int socket_type, int protocol),其中socket类型可以是 SOCK_RAW和SOCK_DGRAM。SOCK_RAW 类型使得数据包从数据链路层取得后,不做任何修改直接传递给用户程序,而 SOCK_DRRAM 则要对数据包进行加工(cooked),把数据包的数据链路层头部去掉,而使用一个通用结构 sockaddr_ll 来保存链路信息。
使 用 2.0 版本内核捕获数据包存在多个问题:首先,SOCK_PACKET 方式使用结构 sockaddr_pkt来保存数据链路层信息,但该结构缺乏包类型信息;其次,如果参数 MSG_TRUNC 传递给读包函数 recvmsg()、recv()、recvfrom() 等,则函数返回的数据包长度是实际读到的包数据长度,而不是数据包真正的长度。Libpcap 的开发者在源代码中明确建议不使用 2.0 版本进行捕获。
相对2.0版本SOCK_PACKET方式,2.2版本的PF_PACKET方式则不存在上述两个问题。在实际应用中,用 户程序显然希望直接得到"原始"的数据包,因此使用 SOCK_RAW 类型最好。但在下面两种情况下,libpcap 不得不使用SOCK_DGRAM类型,从而也必须为数据包合成一个"伪"链路层头部(sockaddr_ll)。
打开网络设备的主函数是pcap_open_live,其任务就是通过给定的接口设备名,获得一个捕获句柄:pcap_t。Pcap_t结构体是大多数libpcap函数都要用到的参数,其中最重要的属性就是上面的socket方式的一种,位于pcap_int.h中,下面是pcap_t的结构:
/*
* We put all the stuff used in the read code path at the beginning,
* to try to keep it together in the same cache line or lines.
*/
struct pcap {
/*
* Method to call to read packets on a live capture.
*/
read_op_t read_op; //回调函数,用户获取数据包。
/*
* Method to call to read to read packets from a savefile.
*/
int (*next_packet_op)(pcap_t *, struct pcap_pkthdr *, u_char **);
#ifdef WIN32
ADAPTER *adapter;
LPPACKET Packet;
int nonblock;
#else
int fd; //文件描述符。实际就是socket
int selectable_fd;
#endif /* WIN32 */
/*
* Read buffer.
*/
int bufsize;
u_char *buffer;
u_char *bp;
int cc;
int break_loop; /* flag set to force break from packet-reading loop */强制从读数据包循环中跳出的标志
void *priv; /* private data for methods */
int swapped;
FILE *rfile; /* null if live capture, non-null if savefile */
int fddipad;
struct pcap *next; /* list of open pcaps that need stuff cleared on close */
/*
* File version number; meaningful only for a savefile, but we
* keep it here so that apps that (mistakenly) ask for the
* version numbers will get the same zero values that they
* always did.
*/
int version_major;
int version_minor;
int snapshot; //用户期望捕获数据包的最大长度,自定义的
int linktype; /* Network linktype */设备类型
int linktype_ext; /* Extended information stored in the linktype field of a file */
int tzoff; /* timezone offset */时区位置 偏移
int offset; /* offset for proper alignment */边界对齐偏移量
int activated; /* true if the capture is really started */
int oldstyle; /* if we're opening with pcap_open_live() */
struct pcap_opt opt;
/*
* Place holder for pcap_next().
*/
u_char *pkt;
/* We're accepting only packets in this direction/these directions. */
pcap_direction_t direction;
/*
* Placeholder for filter code if bpf not in kernel.
*/
//如果BPF过滤代码不能在内核中执行,则将其保存并在用户控件执行
struct bpf_program fcode;
//相关的函数指针,最终指向特定操作系统的处理函数。
char errbuf[PCAP_ERRBUF_SIZE + 1];
int dlt_count;
u_int *dlt_list;
int tstamp_type_count;
u_int *tstamp_type_list;
int tstamp_precision_count;
u_int *tstamp_precision_list;
struct pcap_pkthdr pcap_header; /* This is needed for the pcap_next_ex() to work */
/*
* More methods.
*/
activate_op_t activate_op;
can_set_rfmon_op_t can_set_rfmon_op;
inject_op_t inject_op;
setfilter_op_t setfilter_op;
setdirection_op_t setdirection_op;
set_datalink_op_t set_datalink_op;
getnonblock_op_t getnonblock_op;
setnonblock_op_t setnonblock_op;
stats_op_t stats_op;
/*
* Routine to use as callback for pcap_next()/pcap_next_ex().
*/
pcap_handler oneshot_callback;
#ifdef WIN32
/*
* These are, at least currently, specific to the Win32 NPF
* driver.
*/
setbuff_op_t setbuff_op;
setmode_op_t setmode_op;
setmintocopy_op_t setmintocopy_op;
getadapter_op_t getadapter_op;
#endif
cleanup_op_t cleanup_op;
};
函数pcap_open_live调用中,如果device为NULL或any,则对所有接口捕获,snaplen表示用户期望的捕获数据包最大长度,promisc表示设置接口为混杂模式,to_ms表示函数超时返回的时间。在pcap.c文件中找到pcap_open_live()函数,其源码如下:
pcap_t *
pcap_open_live(const char *source, int snaplen, int promisc, int to_ms, char *errbuf)
{
pcap_t *p;
int status;
p = pcap_create(source, errbuf);
if (p == NULL)
return (NULL);
status = pcap_set_snaplen(p, snaplen);
if (status < 0)
goto fail;
status = pcap_set_promisc(p, promisc);
if (status < 0)
goto fail;
status = pcap_set_timeout(p, to_ms);
if (status < 0)
goto fail;
/*
* Mark this as opened with pcap_open_live(), so that, for
* example, we show the full list of DLT_ values, rather
* than just the ones that are compatible with capturing
* when not in monitor mode. That allows existing applications
* to work the way they used to work, but allows new applications
* that know about the new open API to, for example, find out the
* DLT_ values that they can select without changing whether
* the adapter is in monitor mode or not.
*/
p->oldstyle = 1;
status = pcap_activate(p);
if (status < 0)
goto fail;
return (p);
fail:
if (status == PCAP_ERROR)
snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", source,
p->errbuf);
else if (status == PCAP_ERROR_NO_SUCH_DEVICE ||
status == PCAP_ERROR_PERM_DENIED ||
status == PCAP_ERROR_PROMISC_PERM_DENIED)
snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s (%s)", source,
pcap_statustostr(status), p->errbuf);
else
snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", source,
pcap_statustostr(status));
pcap_close(p);
return (NULL);
}
从上面的源码可以看到,pcap_open_live函数首先调用pcap_create函数,这个函数里面的内容待会儿在下面进行分析,然后就是调用pcap_set_snaplen(p, snaplen)函数设置最大捕获包的长度,对于以太网数据包,最大长度为1518bytes,默认的可以设置成65535可以捕获所有的数据包。然后就是调用pcap_set_promisc(p, promisc)函数设置数据包的捕获模式,1为混杂模式(只有混杂模式才能接收所有经过该网卡设备的数据包)。pcap_set_timeout(p, to_ms)的作用是设置超时的时间,当应用程序在这个时间内没读到数据就返回。接着就是pcap_activate(p)函数了,这个也将在后面进行讲解。
在Libpcap源码为了支持多个操作系统,代码错综复杂。对于pcap_create函数,在很多地方都定义了该函数,下面是在source insight软件中的列表。
其源码如下:
pcap_t *
pcap_create(const char *source, char *errbuf)
{
size_t i;
int is_theirs;
pcap_t *p;
/*
* A null source name is equivalent to the "any" device -
* which might not be supported on this platform, but
* this means that you'll get a "not supported" error
* rather than, say, a crash when we try to dereference
* the null pointer.
*/
if (source == NULL)
source = "any";
/*
* Try each of the non-local-network-interface capture
* source types until we find one that works for this
* device or run out of types.
*/
for (i = 0; capture_source_types[i].create_op != NULL; i++) {
is_theirs = 0;
p = capture_source_types[i].create_op(source, errbuf, &is_theirs);
if (is_theirs) {
/*
* The device name refers to a device of the
* type in question; either it succeeded,
* in which case p refers to a pcap_t to
* later activate for the device, or it
* failed, in which case p is null and we
* should return that to report the failure
* to create.
*/
return (p);
}
}
/*
* OK, try it as a regular network interface.
*/
return (pcap_create_interface(source, errbuf));
}
首先,当传入的设备名为空就这是该source = “any”,any 表示所有的设备都能够获取数据包。接着就是用一个for循环来尝试用每个non-local-network-interface捕捉源类型,直到我们发现一种适合该设备或耗尽类型。如果没有找到,则调用pcap_create_interface(source, errbuf))函数的返回结果作为返回值。
下面为pcap_create_interface(source, errbuf)函数的源代码:
#endif /* SO_ATTACH_FILTER */
pcap_t *
pcap_create_interface(const char *device, char *ebuf)
{
pcap_t *handle;
handle = pcap_create_common(device, ebuf, sizeof (struct pcap_linux));
if (handle == NULL)
return NULL;
// pcap_create_common为初始化的函数,通过网卡设备的名字获得pcap_t*的句柄,然后再设定handle的回调函数。
handle->activate_op = pcap_activate_linux;
handle->can_set_rfmon_op = pcap_can_set_rfmon_linux;
#if defined(HAVE_LINUX_NET_TSTAMP_H) && defined(PACKET_TIMESTAMP)
/*
* We claim that we support:
*
* software time stamps, with no details about their precision;
* hardware time stamps, synced to the host time;
* hardware time stamps, not synced to the host time.
*
* XXX - we can't ask a device whether it supports
* hardware time stamps, so we just claim all devices do.
*/
handle->tstamp_type_count = 3;
handle->tstamp_type_list = malloc(3 * sizeof(u_int));
if (handle->tstamp_type_list == NULL) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s",
pcap_strerror(errno));
free(handle);
return NULL;
}
handle->tstamp_type_list[0] = PCAP_TSTAMP_HOST;
handle->tstamp_type_list[1] = PCAP_TSTAMP_ADAPTER;
handle->tstamp_type_list[2] = PCAP_TSTAMP_ADAPTER_UNSYNCED;
#endif
#if defined(SIOCGSTAMPNS) && defined(SO_TIMESTAMPNS)
/*
* We claim that we support microsecond and nanosecond time
* stamps.
*
* XXX - with adapter-supplied time stamps, can we choose
* microsecond or nanosecond time stamps on arbitrary
* adapters?
*/
handle->tstamp_precision_count = 2;
handle->tstamp_precision_list = malloc(2 * sizeof(u_int));
if (handle->tstamp_precision_list == NULL) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s",
pcap_strerror(errno));
if (handle->tstamp_type_list != NULL)
free(handle->tstamp_type_list);
free(handle);
return NULL;
}
handle->tstamp_precision_list[0] = PCAP_TSTAMP_PRECISION_MICRO;
handle->tstamp_precision_list[1] = PCAP_TSTAMP_PRECISION_NANO;
#endif /* defined(SIOCGSTAMPNS) && defined(SO_TIMESTAMPNS) */
return handle;
}
为了能够支持不同的设备,pcap_create通过#ifdef进行区分,这样就将打开不同的设备集成在一个函数中,而在我们的应用中就是普通的网卡,所以它就是调用pcap_create_common函数,它在pcap.c中定义,感觉有点混乱,为什么不直接在pcap-linux.c中定义呢,个人观点,应该在pcap-linux中定义,显的直观些,害我跟踪的时候,还要到pcap.c中取找这个函数,因为libpcap还要兼容其它操作系统的原因吧,因为你把它放在pcap-linux.c,其它操作系统调用这个函数,就不方便了,从这一点考虑,libpcap的作者们的架构还是挺不错的。另外定义2个回调函数pcap_activate_linux和pcap_can_set_rfmon_linux函数。Pcap_create函数的返回值为pcap_t*类型的网卡的句柄。既然讲到了pcap_create函数,就必须跟踪到pcap_create_common函数及另外的2个回调函数中去。下面接着看pcap_create_common函数的源码:
pcap_t *
pcap_create_common(const char *source, char *ebuf, size_t size)
{
pcap_t *p;
p = pcap_alloc_pcap_t(ebuf, size);
if (p == NULL)
return (NULL);
p->opt.source = strdup(source);
if (p->opt.source == NULL) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s",
pcap_strerror(errno));
free(p);
return (NULL);
}
/*
* Default to "can't set rfmon mode"; if it's supported by
* a platform, the create routine that called us can set
* the op to its routine to check whether a particular
* device supports it.
*/
p->can_set_rfmon_op = pcap_cant_set_rfmon;
initialize_ops(p);
/* put in some defaults*/
pcap_set_snaplen(p, MAXIMUM_SNAPLEN); /* max packet size */
p->opt.timeout = 0; /* no timeout specified */
p->opt.buffer_size = 0; /* use the platform's default */
p->opt.promisc = 0;
p->opt.rfmon = 0;
p->opt.immediate = 0;
p->opt.tstamp_type = -1; /* default to not setting time stamp type */
p->opt.tstamp_precision = PCAP_TSTAMP_PRECISION_MICRO;
return (p);
}
首先调用pcap_alloc_pcap_t函数给p分配内存。然后调用strdup函数。它的作用是复制字符串。返回指向被复制的字符串的指针。需要加头文件#include<string.h>。
在p->can_set_rfmon_op = pcap_cant_set_rfmon这句代码中,默认不设置rfmon 模式。而initialize_ops(p)函数的作用就是设置初始化的一系列回调函数。其中initialize_ops(p)函数的源代码如下:
static void
initialize_ops(pcap_t *p)
{
/*
* Set operation pointers for operations that only work on
* an activated pcap_t to point to a routine that returns
* a "this isn't activated" error.
*/
p->read_op = (read_op_t)pcap_not_initialized;
p->inject_op = (inject_op_t)pcap_not_initialized;
p->setfilter_op = (setfilter_op_t)pcap_not_initialized;
p->setdirection_op = (setdirection_op_t)pcap_not_initialized;
p->set_datalink_op = (set_datalink_op_t)pcap_not_initialized;
p->getnonblock_op = (getnonblock_op_t)pcap_not_initialized;
p->setnonblock_op = (setnonblock_op_t)pcap_not_initialized;
p->stats_op = (stats_op_t)pcap_not_initialized;
#ifdef WIN32
p->setbuff_op = (setbuff_op_t)pcap_not_initialized;
p->setmode_op = (setmode_op_t)pcap_not_initialized;
p->setmintocopy_op = (setmintocopy_op_t)pcap_not_initialized;
p->getadapter_op = pcap_no_adapter;
#endif
/*
* Default cleanup operation - implementations can override
* this, but should call pcap_cleanup_live_common() after
* doing their own additional cleanup.
*/
p->cleanup_op = pcap_cleanup_live_common;
/*
* In most cases, the standard one-shot callback can
* be used for pcap_next()/pcap_next_ex().
*/
p->oneshot_callback = pcap_oneshot;
}
pcap_create_common讲解完了,接着讲解pcap_create函数中的另外一个回调函数,pcap_activate_linux。通过搜索。发现在pcap_linux.c这个文件中。在整个pcap的架构中,把linux要用到的函数都集成到pcap_linux.c中,把多个操作系统共用的函数都放到了pcap.c中,例如前面分析的pcap_create_common、pcap_create_interface函数。下面讲解pcap_activate_linux这个源码。从pcap_activate_linux的源码可以看到,通过pcap_create_common对pcap_t * p设定初始值,其实就像c++的初始化函数一样,比如c++的构造函数,MFC的OninitDialog函数一样。初始化就是初始化,对于不同的系统,就要进行不同的设置了,在linux函数中pcap_activate_linux中可以看到又对pcap_create_common中初始化的回调函数又重新进行了设置,看到这里我就佩服libpcap的作者了,把pcap_create_common函数放到了pcap.c文件中。
/*
* Get a handle for a live capture from the given device. You can
* pass NULL as device to get all packages (without link level
* information of course). If you pass 1 as promisc the interface
* will be set to promiscous mode (XXX: I think this usage should
* be deprecated and functions be added to select that later allow
* modification of that values -- Torsten).
*/
static int
pcap_activate_linux(pcap_t *handle)
{
struct pcap_linux *handlep = handle->priv;
const char *device;
struct ifreq ifr;
int status = 0;
int ret;
device = handle->opt.source; //网卡的名字
/*
* Make sure the name we were handed will fit into the ioctls we
* might perform on the device; if not, return a "No such device"
* indication, as the Linux kernel shouldn't support creating
* a device whose name won't fit into those ioctls.
*
* "Will fit" means "will fit, complete with a null terminator",
* so if the length, which does *not* include the null terminator,
* is greater than *or equal to* the size of the field into which
* we'll be copying it, that won't fit.
*/
if (strlen(device) >= sizeof(ifr.ifr_name)) {
status = PCAP_ERROR_NO_SUCH_DEVICE;
goto fail;
}
handle->inject_op = pcap_inject_linux;
handle->setfilter_op = pcap_setfilter_linux;
handle->setdirection_op = pcap_setdirection_linux;
handle->set_datalink_op = pcap_set_datalink_linux;
handle->getnonblock_op = pcap_getnonblock_fd;
handle->setnonblock_op = pcap_setnonblock_fd;
handle->cleanup_op = pcap_cleanup_linux;
handle->read_op = pcap_read_linux;
handle->stats_op = pcap_stats_linux;
/*
* The "any" device is a special device which causes us not
* to bind to a particular device and thus to look at all
* devices.
*/
if (strcmp(device, "any") == 0) {
if (handle->opt.promisc) {
handle->opt.promisc = 0;
/* Just a warning. */
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"Promiscuous mode not supported on the \"any\" device");
status = PCAP_WARNING_PROMISC_NOTSUP;
}
}
handlep->device = strdup(device);
if (handlep->device == NULL) {
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "strdup: %s",
pcap_strerror(errno) );
return PCAP_ERROR;
}
/* copy timeout value */
handlep->timeout = handle->opt.timeout;
/*
* If we're in promiscuous mode, then we probably want
* to see when the interface drops packets too, so get an
* initial count from /proc/net/dev
*/
if (handle->opt.promisc)
handlep->proc_dropped = linux_if_drops(handlep->device);
/*
* Current Linux kernels use the protocol family PF_PACKET to
* allow direct access to all packets on the network while
* older kernels had a special socket type SOCK_PACKET to
* implement this feature.
* While this old implementation is kind of obsolete we need
* to be compatible with older kernels for a while so we are
* trying both methods with the newer method preferred.
*/
//现在的内核是采用的PF_PACKET。对于以前的内核采用SOCK_PACKET
ret = activate_new(handle);
//activate_new函数的作用在没有定义PF_RING的情况下通过PF_PACKET接口建立socket,返回1表示成功,可以采用PF_PACKET建立socket,返回0表示失败,这时可以尝试采用SOCKET_PACKET接口建立socket,该函数也在pcap-linux.c中可以找到源码;根据status的返回值,确定3种不同的情况,返回1成功,表示采用的是PF_PACKET建立socket,而返回0的时候,又调用activate_old函数进行判断,如果activate_old函数返回1表示调用的是SOCK_PACKET建立socket,而activate_old返回0表示失败;第3种情况是status不等于上面的2个值,则表示失败。在下面将详细分析activate_new函数。
if (ret < 0) {
/*
* Fatal error with the new way; just fail.
* ret has the error return; if it's PCAP_ERROR,
* handle->errbuf has been set appropriately.
*/
status = ret;
goto fail;
}
if (ret == 1) {
/*
* Success.
* Try to use memory-mapped access.
*/
switch (activate_mmap(handle, &status)) {
case 1:
/*
* We succeeded. status has been
* set to the status to return,
* which might be 0, or might be
* a PCAP_WARNING_ value.
*/
return status;
case 0:
/*
* Kernel doesn't support it - just continue
* with non-memory-mapped access.
*/
break;
case -1:
/*
* We failed to set up to use it, or the kernel
* supports it, but we failed to enable it.
* ret has been set to the error status to
* return and, if it's PCAP_ERROR, handle->errbuf
* contains the error message.
*/
status = ret;
goto fail;
}
}
else if (ret == 0) {
/* Non-fatal error; try old way */
if ((ret = activate_old(handle)) != 1) {
/*
* Both methods to open the packet socket failed.
* Tidy up and report our failure (handle->errbuf
* is expected to be set by the functions above).
*/
status = ret;
goto fail;
}
}
/*
* We set up the socket, but not with memory-mapped access.
*/
if (handle->opt.buffer_size != 0) {
//如果buffer_size不为0,pcap_set_buffer_size设置了内核缓冲区的大小,而不是采用默认的内核缓冲区,因此首先通过setsockopt发送设置命令,然后调用malloc分配内存
/*
* Set the socket buffer size to the specified value.
*/
if (setsockopt(handle->fd, SOL_SOCKET, SO_RCVBUF,
&handle->opt.buffer_size,
sizeof(handle->opt.buffer_size)) == -1) {
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"SO_RCVBUF: %s", pcap_strerror(errno));
status = PCAP_ERROR;
goto fail;
}
}
/* Allocate the buffer */
handle->buffer = malloc(handle->bufsize + handle->offset);
if (!handle->buffer) {
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"malloc: %s", pcap_strerror(errno));
status = PCAP_ERROR;
goto fail;
}
/*
* "handle->fd" is a socket, so "select()" and "poll()"
* should work on it.
*/
handle->selectable_fd = handle->fd;
return status;
fail:
pcap_cleanup_linux(handle);
return status;
}
pcap_activate_linux函数分析完了。但是其到底是怎么建立通讯的还不是很清楚,现在进入activate_new函数进行分析,其源码如下:
/* ===== Functions to interface to the newer kernels ================== */
/*
* Try to open a packet socket using the new kernel PF_PACKET interface.
* Returns 1 on success, 0 on an error that means the new interface isn't
* present (so the old SOCK_PACKET interface should be tried), and a
* PCAP_ERROR_ value on an error that means that the old mechanism won't
* work either (so it shouldn't be tried).
*/
static int
activate_new(pcap_t *handle)
{
#ifdef HAVE_PF_PACKET_SOCKETS
struct pcap_linux *handlep = handle->priv;
const char *device = handle->opt.source;
int is_any_device = (strcmp(device, "any") == 0);
int sock_fd = -1, arptype;
#ifdef HAVE_PACKET_AUXDATA
int val;
#endif
int err = 0;
struct packet_mreq mr;
/*
* Open a socket with protocol family packet. If the
* "any" device was specified, we open a SOCK_DGRAM
* socket for the cooked interface, otherwise we first
* try a SOCK_RAW socket for the raw interface.
*/
sock_fd = is_any_device ?
socket(PF_PACKET, SOCK_DGRAM, htons(ETH_P_ALL)) :
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
// 建立socket。当网卡设备名为any的时候用SOCK_DGRAM,当不为any时用SOCK_RAM 来建立。至于后面的通信就是在这里开始的。基于该socket描述符。在下面肯定有bind函数。
if (sock_fd == -1) {
if (errno == EINVAL || errno == EAFNOSUPPORT) {
/*
* We don't support PF_PACKET/SOCK_whatever
* sockets; try the old mechanism.
*/
return 0;
}
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "socket: %s",
pcap_strerror(errno) );
if (errno == EPERM || errno == EACCES) {
/*
* You don't have permission to open the
* socket.
*/
return PCAP_ERROR_PERM_DENIED;
} else {
/*
* Other error.
*/
return PCAP_ERROR;
}
}
/* It seems the kernel supports the new interface. */
handlep->sock_packet = 0;
/*
* Get the interface index of the loopback device.
* If the attempt fails, don't fail, just set the
* "handlep->lo_ifindex" to -1.
*
* XXX - can there be more than one device that loops
* packets back, i.e. devices other than "lo"? If so,
* we'd need to find them all, and have an array of
* indices for them, and check all of them in
* "pcap_read_packet()".
*/
handlep->lo_ifindex = iface_get_id(sock_fd, "lo", handle->errbuf);
/*
* Default value for offset to align link-layer payload
* on a 4-byte boundary.
*/
handle->offset = 0;
/*
* What kind of frames do we have to deal with? Fall back
* to cooked mode if we have an unknown interface type
* or a type we know doesn't work well in raw mode.
*/
if (!is_any_device) {
/* Assume for now we don't need cooked mode. */
handlep->cooked = 0;
if (handle->opt.rfmon) {
/*
* We were asked to turn on monitor mode.
* Do so before we get the link-layer type,
* because entering monitor mode could change
* the link-layer type.
*/
err = enter_rfmon_mode(handle, sock_fd, device);
if (err < 0) {
/* Hard failure */
close(sock_fd);
return err;
}
if (err == 0) {
/*
* Nothing worked for turning monitor mode
* on.
*/
close(sock_fd);
return PCAP_ERROR_RFMON_NOTSUP;
}
/*
* Either monitor mode has been turned on for
* the device, or we've been given a different
* device to open for monitor mode. If we've
* been given a different device, use it.
*/
if (handlep->mondevice != NULL)
device = handlep->mondevice;
}
arptype = iface_get_arptype(sock_fd, device, handle->errbuf);
if (arptype < 0) {
close(sock_fd);
return arptype;
}
map_arphrd_to_dlt(handle, arptype, device, 1);
if (handle->linktype == -1 ||
handle->linktype == DLT_LINUX_SLL ||
handle->linktype == DLT_LINUX_IRDA ||
handle->linktype == DLT_LINUX_LAPD ||
handle->linktype == DLT_NETLINK ||
(handle->linktype == DLT_EN10MB &&
(strncmp("isdn", device, 4) == 0 ||
strncmp("isdY", device, 4) == 0))) {
/*
* Unknown interface type (-1), or a
* device we explicitly chose to run
* in cooked mode (e.g., PPP devices),
* or an ISDN device (whose link-layer
* type we can only determine by using
* APIs that may be different on different
* kernels) - reopen in cooked mode.
*/
if (close(sock_fd) == -1) {
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"close: %s", pcap_strerror(errno));
return PCAP_ERROR;
}
sock_fd = socket(PF_PACKET, SOCK_DGRAM,
htons(ETH_P_ALL));
if (sock_fd == -1) {
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"socket: %s", pcap_strerror(errno));
if (errno == EPERM || errno == EACCES) {
/*
* You don't have permission to
* open the socket.
*/
return PCAP_ERROR_PERM_DENIED;
} else {
/*
* Other error.
*/
return PCAP_ERROR;
}
}
handlep->cooked = 1;
/*
* Get rid of any link-layer type list
* we allocated - this only supports cooked
* capture.
*/
if (handle->dlt_list != NULL) {
free(handle->dlt_list);
handle->dlt_list = NULL;
handle->dlt_count = 0;
}
if (handle->linktype == -1) {
/*
* Warn that we're falling back on
* cooked mode; we may want to
* update "map_arphrd_to_dlt()"
* to handle the new type.
*/
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"arptype %d not "
"supported by libpcap - "
"falling back to cooked "
"socket",
arptype);
}
/*
* IrDA capture is not a real "cooked" capture,
* it's IrLAP frames, not IP packets. The
* same applies to LAPD capture.
*/
if (handle->linktype != DLT_LINUX_IRDA &&
handle->linktype != DLT_LINUX_LAPD &&
handle->linktype != DLT_NETLINK)
handle->linktype = DLT_LINUX_SLL;
}
handlep->ifindex = iface_get_id(sock_fd, device,
handle->errbuf);
if (handlep->ifindex == -1) {
close(sock_fd);
return PCAP_ERROR;
}
//在这里出现了iface_bind函数。在该函数里面bind(fd, (struct sockaddr *) &sll, sizeof(sll)) == -1进行绑定。
if ((err = iface_bind(sock_fd, handlep->ifindex,
handle->errbuf)) != 1) {
close(sock_fd);
if (err < 0)
return err;
else
return 0; /* try old mechanism */
}
} else {
/*
* The "any" device.
*/
if (handle->opt.rfmon) {
/*
* It doesn't support monitor mode.
*/
close(sock_fd);
return PCAP_ERROR_RFMON_NOTSUP;
}
/*
* It uses cooked mode.
*/
handlep->cooked = 1;
handle->linktype = DLT_LINUX_SLL;
/*
* We're not bound to a device.
* For now, we're using this as an indication
* that we can't transmit; stop doing that only
* if we figure out how to transmit in cooked
* mode.
*/
handlep->ifindex = -1;
}
/*
* Select promiscuous mode on if "promisc" is set.
*
* Do not turn allmulti mode on if we don't select
* promiscuous mode - on some devices (e.g., Orinoco
* wireless interfaces), allmulti mode isn't supported
* and the driver implements it by turning promiscuous
* mode on, and that screws up the operation of the
* card as a normal networking interface, and on no
* other platform I know of does starting a non-
* promiscuous capture affect which multicast packets
* are received by the interface.
*/
/*
* Hmm, how can we set promiscuous mode on all interfaces?
* I am not sure if that is possible at all. For now, we
* silently ignore attempts to turn promiscuous mode on
* for the "any" device (so you don't have to explicitly
* disable it in programs such as tcpdump).
*/
if (!is_any_device && handle->opt.promisc) {
memset(&mr, 0, sizeof(mr));
mr.mr_ifindex = handlep->ifindex;
mr.mr_type = PACKET_MR_PROMISC;
if (setsockopt(sock_fd, SOL_PACKET, PACKET_ADD_MEMBERSHIP,
&mr, sizeof(mr)) == -1) {
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"setsockopt: %s", pcap_strerror(errno));
close(sock_fd);
return PCAP_ERROR;
}
}
/* Enable auxillary data if supported and reserve room for
* reconstructing VLAN headers. */
#ifdef HAVE_PACKET_AUXDATA
val = 1;
if (setsockopt(sock_fd, SOL_PACKET, PACKET_AUXDATA, &val,
sizeof(val)) == -1 && errno != ENOPROTOOPT) {
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"setsockopt: %s", pcap_strerror(errno));
close(sock_fd);
return PCAP_ERROR;
}
handle->offset += VLAN_TAG_LEN;
#endif /* HAVE_PACKET_AUXDATA */
/*
* This is a 2.2[.x] or later kernel (we know that
* because we're not using a SOCK_PACKET socket -
* PF_PACKET is supported only in 2.2 and later
* kernels).
*
* We can safely pass "recvfrom()" a byte count
* based on the snapshot length.
*
* If we're in cooked mode, make the snapshot length
* large enough to hold a "cooked mode" header plus
* 1 byte of packet data (so we don't pass a byte
* count of 0 to "recvfrom()").
*/
if (handlep->cooked) {
if (handle->snapshot < SLL_HDR_LEN + 1)
handle->snapshot = SLL_HDR_LEN + 1;
}
handle->bufsize = handle->snapshot;
/*
* Set the offset at which to insert VLAN tags.
*/
switch (handle->linktype) {
case DLT_EN10MB:
handlep->vlan_offset = 2 * ETH_ALEN;
break;
case DLT_LINUX_SLL:
handlep->vlan_offset = 14;
break;
default:
handlep->vlan_offset = -1; /* unknown */
break;
}
#if defined(SIOCGSTAMPNS) && defined(SO_TIMESTAMPNS)
if (handle->opt.tstamp_precision == PCAP_TSTAMP_PRECISION_NANO) {
int nsec_tstamps = 1;
if (setsockopt(sock_fd, SOL_SOCKET, SO_TIMESTAMPNS, &nsec_tstamps, sizeof(nsec_tstamps)) < 0) {
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "setsockopt: unable to set SO_TIMESTAMPNS");
close(sock_fd);
return PCAP_ERROR;
}
}
#endif /* defined(SIOCGSTAMPNS) && defined(SO_TIMESTAMPNS) */
/*
* We've succeeded. Save the socket FD in the pcap structure.
*/
handle->fd = sock_fd;
return 1;
#else /* HAVE_PF_PACKET_SOCKETS */
strlcpy(ebuf,
"New packet capturing interface not supported by build "
"environment", PCAP_ERRBUF_SIZE);
return 0;
#endif /* HAVE_PF_PACKET_SOCKETS */
}
在activate_new函数中,主要涉及到socket的创建与bind。下面将pcap_activate_linux函数中定义的重要回调函数罗列出来:
handle->inject_op = pcap_inject_linux;
handle->setfilter_op = pcap_setfilter_linux;
handle->setdirection_op = pcap_setdirection_linux;
handle->set_datalink_op = pcap_set_datalink_linux;
handle->getnonblock_op = pcap_getnonblock_fd;
handle->setnonblock_op = pcap_setnonblock_fd;
handle->cleanup_op = pcap_cleanup_linux;
handle->read_op = pcap_read_linux;
handle->stats_op = pcap_stats_linux;
其中一个重要的回调函数就是pcap_read_linux。进入其源码,如下:
/*
* Read at most max_packets from the capture stream and call the callback
* for each of them. Returns the number of packets handled or -1 if an
* error occured.
*/
static int
pcap_read_linux(pcap_t *handle, int max_packets, pcap_handler callback, u_char *user)
{
/*
* Currently, on Linux only one packet is delivered per read,
* so we don't loop.
*/
return pcap_read_packet(handle, callback, user);
}
其中就只有一句,return pcap_read_packet(handle, callback, user)。调用pcap_read_packet读取数据包。在该函数中,初步断定是在后面的pcap_next、pcap_dispatch、pcap_loop这几个函数读包时调用的。下面开始分析pcap_read_packet函数,源码如下:
/*
* Read a packet from the socket calling the handler provided by
* the user. Returns the number of packets received or -1 if an
* error occured.
*/
static int
pcap_read_packet(pcap_t *handle, pcap_handler callback, u_char *userdata)
{
struct pcap_linux *handlep = handle->priv;
u_char *bp; //数据包缓冲区指针
int offset;
//bp与捕获句柄pcap_t中handle->buffer之间的偏移量,其目的是为再加工模式捕获情况下,为合成的伪数据链路层头部流出空间
//PACKET_SOCKET方式下,recvfrom()返回sockeaddr_ll类型,而在SOCK_PACKET方式下返回sockaddr类型
#ifdef HAVE_PF_PACKET_SOCKETS
struct sockaddr_ll from;
struct sll_header *hdrp;
#else
struct sockaddr from;
#endif
#if defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI)
struct iovec iov;
struct msghdr msg;
struct cmsghdr *cmsg;
union {
struct cmsghdr cmsg;
char buf[CMSG_SPACE(sizeof(struct tpacket_auxdata))];
} cmsg_buf;
#else /* defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) */
socklen_t fromlen;
#endif /* defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) */
int packet_len, caplen;
struct pcap_pkthdr pcap_header;
//libpcap自定义的头部,pcap_pkthdr结构体如下:
struct pcap_pkthdr {
struct timeval ts; /* time stamp */
bpf_u_int32 caplen; /* length of portion present */
bpf_u_int32 len; /* length this packet (off wire) */
};
该结构体主要记录时间戳、抓取的数据包以及数据包长度。通常后两者的长度是一样的。
#ifdef HAVE_PF_PACKET_SOCKETS
/*
* If this is a cooked device, leave extra room for a
* fake packet header.
*/
//如果是加工模式,则在合成的链路层头部留出空间
if (handlep->cooked)
offset = SLL_HDR_LEN;
//其他两种方式下,链路层头部不做修改返回,不需要留出空间
else
offset = 0;
#else
/*
* This system doesn't have PF_PACKET sockets, so it doesn't
* support cooked devices.
*/
offset = 0;
#endif
/*
* Receive a single packet from the kernel.
* We ignore EINTR, as that might just be due to a signal
* being delivered - if the signal should interrupt the
* loop, the signal handler should call pcap_breakloop()
* to set handle->break_loop (we ignore it on other
* platforms as well).
* We also ignore ENETDOWN, so that we can continue to
* capture traffic if the interface goes down and comes
* back up again; comments in the kernel indicate that
* we'll just block waiting for packets if we try to
* receive from a socket that delivered ENETDOWN, and,
* if we're using a memory-mapped buffer, we won't even
* get notified of "network down" events.
*/
bp = handle->buffer + handle->offset;
#if defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI)
msg.msg_name = &from;
msg.msg_namelen = sizeof(from);
msg.msg_iov = &iov;
msg.msg_iovlen = 1;
msg.msg_control = &cmsg_buf;
msg.msg_controllen = sizeof(cmsg_buf);
msg.msg_flags = 0;
iov.iov_len = handle->bufsize - offset;
iov.iov_base = bp + offset;
#endif /* defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) */
do {
/*
* Has "pcap_breakloop()" been called?
*/
if (handle->break_loop) {
/*
* Yes - clear the flag that indicates that it has,
* and return PCAP_ERROR_BREAK as an indication that
* we were told to break out of the loop.
*/
handle->break_loop = 0;
return PCAP_ERROR_BREAK;
}
#if defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI)
packet_len = recvmsg(handle->fd, &msg, MSG_TRUNC);
//在这里以及后面的recvfrom函数,说明了定义不同的类型,其接受的数据的方式是不一样的。
#else /* defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) */
fromlen = sizeof(from);
//从内核中接收一个数据包,注意函数入参中对bp的位置的修正
packet_len = recvfrom(
handle->fd, bp + offset,
handle->bufsize - offset, MSG_TRUNC,
(struct sockaddr *) &from, &fromlen);
#endif /* defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) */
} while (packet_len == -1 && errno == EINTR);
/* Check if an error occured */
if (packet_len == -1) {
switch (errno) {
case EAGAIN:
return 0; /* no packet there */
case ENETDOWN:
/*
* The device on which we're capturing went away.
*
* XXX - we should really return
* PCAP_ERROR_IFACE_NOT_UP, but pcap_dispatch()
* etc. aren't defined to return that.
*/
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"The interface went down");
return PCAP_ERROR;
default:
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"recvfrom: %s", pcap_strerror(errno));
return PCAP_ERROR;
}
}
#ifdef HAVE_PF_PACKET_SOCKETS
//
if (!handlep->sock_packet) {
/*
* Unfortunately, there is a window between socket() and
* bind() where the kernel may queue packets from any
* interface. If we're bound to a particular interface,
* discard packets not from that interface.
*
* (If socket filters are supported, we could do the
* same thing we do when changing the filter; however,
* that won't handle packet sockets without socket
* filter support, and it's a bit more complicated.
* It would save some instructions per packet, however.)
*/
if (handlep->ifindex != -1 &&
from.sll_ifindex != handlep->ifindex)
return 0;
/*
* Do checks based on packet direction.
* We can only do this if we're using PF_PACKET; the
* address returned for SOCK_PACKET is a "sockaddr_pkt"
* which lacks the relevant packet type information.
*/
if (!linux_check_direction(handle, &from))
return 0;
}
#endif
#ifdef HAVE_PF_PACKET_SOCKETS
/*
* If this is a cooked device, fill in the fake packet header.
*/
//如果是加工模式,则合成伪链路层头部
if (handlep->cooked) {
/*
* Add the length of the fake header to the length
* of packet data we read.
*/
//首先修正捕获包数据的长度,加上链路层头部的长度
packet_len += SLL_HDR_LEN;
hdrp = (struct sll_header *)bp;
hdrp->sll_pkttype = map_packet_type_to_sll_type(from.sll_pkttype);
hdrp->sll_hatype = htons(from.sll_hatype);
hdrp->sll_halen = htons(from.sll_halen);
memcpy(hdrp->sll_addr, from.sll_addr,
(from.sll_halen > SLL_ADDRLEN) ?
SLL_ADDRLEN :
from.sll_halen);
hdrp->sll_protocol = from.sll_protocol;
}
#if defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI)
if (handlep->vlan_offset != -1) {
for (cmsg = CMSG_FIRSTHDR(&msg); cmsg; cmsg = CMSG_NXTHDR(&msg, cmsg)) {
struct tpacket_auxdata *aux;
unsigned int len;
struct vlan_tag *tag;
if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct tpacket_auxdata)) ||
cmsg->cmsg_level != SOL_PACKET ||
cmsg->cmsg_type != PACKET_AUXDATA)
continue;
aux = (struct tpacket_auxdata *)CMSG_DATA(cmsg);
#if defined(TP_STATUS_VLAN_VALID)
if ((aux->tp_vlan_tci == 0) && !(aux->tp_status & TP_STATUS_VLAN_VALID))
#else
if (aux->tp_vlan_tci == 0) /* this is ambigious but without the
TP_STATUS_VLAN_VALID flag, there is
nothing that we can do */
#endif
continue;
len = packet_len > iov.iov_len ? iov.iov_len : packet_len;
if (len < (unsigned int) handlep->vlan_offset)
break;
bp -= VLAN_TAG_LEN;
memmove(bp, bp + VLAN_TAG_LEN, handlep->vlan_offset);
tag = (struct vlan_tag *)(bp + handlep->vlan_offset);
tag->vlan_tpid = htons(ETH_P_8021Q);
tag->vlan_tci = htons(aux->tp_vlan_tci);
packet_len += VLAN_TAG_LEN;
}
}
#endif /* defined(HAVE_PACKET_AUXDATA) && defined(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI) */
#endif /* HAVE_PF_PACKET_SOCKETS */
/*
* XXX: According to the kernel source we should get the real
* packet len if calling recvfrom with MSG_TRUNC set. It does
* not seem to work here :(, but it is supported by this code
* anyway.
* To be honest the code RELIES on that feature so this is really
* broken with 2.2.x kernels.
* I spend a day to figure out what's going on and I found out
* that the following is happening:
*
* The packet comes from a random interface and the packet_rcv
* hook is called with a clone of the packet. That code inserts
* the packet into the receive queue of the packet socket.
* If a filter is attached to that socket that filter is run
* first - and there lies the problem. The default filter always
* cuts the packet at the snaplen:
*
* # tcpdump -d
* (000) ret #68
*
* So the packet filter cuts down the packet. The recvfrom call
* says "hey, it's only 68 bytes, it fits into the buffer" with
* the result that we don't get the real packet length. This
* is valid at least until kernel 2.2.17pre6.
*
* We currently handle this by making a copy of the filter
* program, fixing all "ret" instructions with non-zero
* operands to have an operand of MAXIMUM_SNAPLEN so that the
* filter doesn't truncate the packet, and supplying that modified
* filter to the kernel.
*/
//修正捕获的数据包的成都,根据前面的讨论,SOCK_PACKET方式下长度可能是不准确的
caplen = packet_len;
if (caplen > handle->snapshot)
caplen = handle->snapshot;
/* Run the packet filter if not using kernel filter */
//如果没有使用内核级的包过滤,则在用户空间进行过滤
if (handlep->filter_in_userland && handle->fcode.bf_insns) {
if (bpf_filter(handle->fcode.bf_insns, bp,
packet_len, caplen) == 0)
{
/* rejected by filter */
//没有通过过滤,数据包被丢弃
return 0;
}
}
/* Fill in our own header data */
//填充libpcap自定义数据包头部数据:捕获时间,捕获的成都,真实的长度
/* get timestamp for this packet */
#if defined(SIOCGSTAMPNS) && defined(SO_TIMESTAMPNS)
if (handle->opt.tstamp_precision == PCAP_TSTAMP_PRECISION_NANO) {
if (ioctl(handle->fd, SIOCGSTAMPNS, &pcap_header.ts) == -1) {
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"SIOCGSTAMPNS: %s", pcap_strerror(errno));
return PCAP_ERROR;
}
} else
#endif
{
if (ioctl(handle->fd, SIOCGSTAMP, &pcap_header.ts) == -1) {
snprintf(handle->errbuf, PCAP_ERRBUF_SIZE,
"SIOCGSTAMP: %s", pcap_strerror(errno));
return PCAP_ERROR;
}
}
pcap_header.caplen = caplen;
pcap_header.len = packet_len;
/*
* Count the packet.
*
* Arguably, we should count them before we check the filter,
* as on many other platforms "ps_recv" counts packets
* handed to the filter rather than packets that passed
* the filter, but if filtering is done in the kernel, we
* can't get a count of packets that passed the filter,
* and that would mean the meaning of "ps_recv" wouldn't
* be the same on all Linux systems.
*
* XXX - it's not the same on all systems in any case;
* ideally, we should have a "get the statistics" call
* that supplies more counts and indicates which of them
* it supplies, so that we supply a count of packets
* handed to the filter only on platforms where that
* information is available.
*
* We count them here even if we can get the packet count
* from the kernel, as we can only determine at run time
* whether we'll be able to get it from the kernel (if
* HAVE_TPACKET_STATS isn't defined, we can't get it from
* the kernel, but if it is defined, the library might
* have been built with a 2.4 or later kernel, but we
* might be running on a 2.2[.x] kernel without Alexey
* Kuznetzov's turbopacket patches, and thus the kernel
* might not be able to supply those statistics). We
* could, I guess, try, when opening the socket, to get
* the statistics, and if we can not increment the count
* here, but it's not clear that always incrementing
* the count is more expensive than always testing a flag
* in memory.
*
* We keep the count in "handlep->packets_read", and use that
* for "ps_recv" if we can't get the statistics from the kernel.
* We do that because, if we *can* get the statistics from
* the kernel, we use "handlep->stat.ps_recv" and
* "handlep->stat.ps_drop" as running counts, as reading the
* statistics from the kernel resets the kernel statistics,
* and if we directly increment "handlep->stat.ps_recv" here,
* that means it will count packets *twice* on systems where
* we can get kernel statistics - once here, and once in
* pcap_stats_linux().
*/
//累加捕获数据包数目,注意到在不同内核和捕获方式情况下数目可能不准确
handlep->packets_read++;
/* Call the user supplied callback function */
//调用用户定义的回调函数
callback(userdata, &pcap_header, bp);
return 1;
}
一直将怎个源码看一下,发现其中最主要的还是对数据包的接收,以及对其中的数据的收集整理,计数等操作。
在前面的几十页中,pcap_open_live还没有讲解完。就分析了其中的调用的一个pcap_create函数。这也体现了Libpcap的强大之处。下面将分析 pcap_open_live中的另一个函数pcap_activate(p)。其源码如下:
int
pcap_activate(pcap_t *p)
{
int status;
/*
* Catch attempts to re-activate an already-activated
* pcap_t; this should, for example, catch code that
* calls pcap_open_live() followed by pcap_activate(),
* as some code that showed up in a Stack Exchange
* question did.
*/
if (pcap_check_activated(p))
return (PCAP_ERROR_ACTIVATED);
status = p->activate_op(p);
//activate_op函数,通过搜索其原型为函数指针。它的初始化赋值在pcap-linux.c下410行。handle->activate_op = pcap_activate_linux;明白了在pcap_create中定义的pcap_activate_linux函数中赋值的回调函数activate_op终于在这里调用了。在pcap_create中只是赋值定义了该回调函数,而调用就是在这里。
if (status >= 0)
p->activated = 1;
else {
if (p->errbuf[0] == '\0') {
/*
* No error message supplied by the activate routine;
* for the benefit of programs that don't specially
* handle errors other than PCAP_ERROR, return the
* error message corresponding to the status.
*/
snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s",
pcap_statustostr(status));
}
/*
* Undo any operation pointer setting, etc. done by
* the activate operation.
*/
initialize_ops(p);
}
return (status);
}
Pcap_open_live函数到现在终于分析完了。其实就pcap_create和pcap_activate两个函数。在pcap_create中主要是socket的建立和绑定。而在pcap_activate中定义的是接收消息回调函数的定义。接下来对pcap_loop函数的分析,其中肯定必定会调用该回调函数pcap_read_linux。在该回调函数中pcap_read_packet读取数据包。
4.3获取数据包
通过前面的分析,下面将讲解如何获取数据包,以及用户回调函数的处理。那就是pcap_loop函数。其源码如下:
int
pcap_loop(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
{
register int n;
for (;;) {
//读取本地文件。
if (p->rfile != NULL) {
/*
* 0 means EOF, so don't loop if we get 0.
*/
n = pcap_offline_read(p, cnt, callback, user);
} else {
/*
* XXX keep reading until we get something
* (or an error occurs)
*/
do {
n = p->read_op(p, cnt, callback, user);
} while (n == 0);
}
if (n <= 0)
return (n);
if (!PACKET_COUNT_IS_UNLIMITED(cnt)) {
cnt -= n;
if (cnt <= 0)
return (0);
}
}
}
首先通过判断rfile是否为空,为空,则进行后面的数据包的获取。不为空就处理本地文件的读取。p->read_op(p, cnt, callback, user)回调函数。搜索整个工程,发现其位于pcap-linux.c函数的1265行。在这行定义的回调函数,终于在这里进行了调用。该回调函数的分析在上面已经进行分析了,主要是获取数据包。也都详细的讲解了。在最后又一个callback(userdata, &pcap_header, bp);函数,是调用用户自定义的回调函数。最后通过处理用户传送的捕获数据长度的参数,当cnt为有限的时候就行减操作,知道小于等于0时,其代码如下:
if (!PACKET_COUNT_IS_UNLIMITED(cnt)) {
cnt -= n;
if (cnt <= 0)
return (0);
}
更多推荐
libpcap源码分析
发布评论