问题描述
限时送ChatGPT账号..我正在尝试制作一个动态 GUI,点击一个按钮会导致创建一个新框架,该框架放置在按钮上方,其中包含 3 个入口小部件(用户选项),我需要能够阅读来自 3 个条目小部件的用户输入 &可能会改变它们.每次按下按钮时,都会出现三个新的可调用条目小部件.
我知道这是错误的,因为它一直给我错误,但是可以使用类似于列表的东西来动态创建小部件吗?
from Tkinter import *应用程序 = Tk()框架名称 = []小部件名称 = []def createwidgets():全局小部件名称全局框架名称frameNames += (str("g"+str(len(frameNames)))) #为什么字母 &数字被添加为单独的元素?widgetNames += [(str("w"+str(len(widgetNames)-1))),(str("w"+str(len(widgetNames)))),(str("w"+str(len(widgetNames)+1)))]frameNames[len(frameNames) - 1] = Frame(app)frameNames[len(frameNames) - 1].pack()widgetNames[len(widgetNames) - 3] = Entry(frameNames[len(frameNames) - 1])widgetNames[len(widgetNames) - 3].pack()widgetNames[len(widgetNames) - 2] = Entry(frameNames[len(frameNames - )- 1])widgetNames[len(widgetNames) - 2].pack()widgetNames[len(widgetNames) - 1] = Entry(frameNames[len(frameNames) - 1])widgetNames[len(widgetNames) - 1].pack()createWidgetButton = Button(app, text="createWidgets", command=createwidgets())createWidgetButton.grid(sticky=S)app.mainloop()
解决方案主要问题是这四行代码:
frameNames[len(frameNames) - 1] = Frame(app)frameNames[len(frameNames) - 1].pack()...createWidgetButton = Button(app, text="createWidgets", command=createwidgets())createWidgetButton.grid(sticky=S)
您正在将框架和按钮创建为 app
的子项,但是您使用 grid
作为其中之一,使用 pack
作为另一个.你必须与 app
的所有直系后代保持一致——他们必须都使用 pack
或者他们必须都使用 grid
.
第二个问题是这一行:
frameNames += (str("g"+str(len(frameNames)))) #为什么字母 &数字被添加为单独的元素?
这里,frameNames
是一个列表,您正试图用一个字符串添加它.添加与附加不同.您需要附加新名称,或将新名称放入临时列表中,然后再添加.
frameNames.append(str(...))
第三个问题是这一行:
createWidgetButton = Button(app, text="createWidgets", command=createwidgets())
上面和这个完全一样:
result = createWidgets()createWidgetButton = Button(app, text="createWidgets", command=result)
您必须将引用传递给函数,而不是调用该函数.将这一行改成这样(注意 createWidgets
后面没有括号):
createWidgetButton = Button(app, text="createWidgets", command=createwidgets)
<小时>
与问题无关,但如果您使用临时变量而不是重复模式 (str("w"+str(len(widgetNames)-1)
.正如所写,您的代码几乎无法阅读.此外,您不想存储小部件名称,您需要存储实际的小部件本身.>
最后,不要进行通配符导入.根本没有充分的理由这样做.
以下是我将如何重写您的代码:
将 Tkinter 导入为 tkapp = tk.Tk()帧 = []小部件 = []def createwidgets():全局小部件名称全局框架名称frame = tk.Frame(app,borderwidth=2,relief="groove")帧.附加(帧)frame.pack(side="top", fill="x")对于范围内的 i (3):小部件 = tk.Entry(frame)小部件.附加(小部件)widget.pack(side="left")createWidgetButton = tk.Button(app, text="createWidgets", command=createwidgets)createWidgetButton.pack(side="bottom", fill="x")app.mainloop()
I'm attempting to make a dynamic GUI where clicking a button causes the creation of a new frame that is placed above the button with 3 entry widgets (user options) inside of it, and I need to be able to read the user input from the 3 entry widgets & possibly alter them. Each time the button is pressed, three new callable entry widgets should appear.
I know that this is wrong because it has been giving me errors, but could something similar to the lists be used to create the widgets dynamically?
from Tkinter import *
app = Tk()
frameNames = []
widgetNames = []
def createwidgets():
global widgetNames
global frameNames
frameNames += (str("g"+str(len(frameNames)))) #why does the letter & number get added as seperate elements?
widgetNames += [(str("w"+str(len(widgetNames)-1))),
(str("w"+str(len(widgetNames)))),
(str("w"+str(len(widgetNames)+1)))]
frameNames[len(frameNames) - 1] = Frame(app)
frameNames[len(frameNames) - 1].pack()
widgetNames[len(widgetNames) - 3] = Entry(frameNames[len(frameNames) - 1])
widgetNames[len(widgetNames) - 3].pack()
widgetNames[len(widgetNames) - 2] = Entry(frameNames[len(frameNames - )- 1])
widgetNames[len(widgetNames) - 2].pack()
widgetNames[len(widgetNames) - 1] = Entry(frameNames[len(frameNames) - 1])
widgetNames[len(widgetNames) - 1].pack()
createWidgetButton = Button(app, text="createWidgets", command=createwidgets())
createWidgetButton.grid(sticky=S)
app.mainloop()
解决方案
The main problem is these four lines of code:
frameNames[len(frameNames) - 1] = Frame(app)
frameNames[len(frameNames) - 1].pack()
...
createWidgetButton = Button(app, text="createWidgets", command=createwidgets())
createWidgetButton.grid(sticky=S)
You are creating both the frame and button as a child of app
, but you are using grid
for one and pack
for the other. You must be consistent with all direct descendants of app
- they must all use pack
or they must all use grid
.
The second problem is this line:
frameNames += (str("g"+str(len(frameNames)))) #why does the letter & number get added as seperate elements?
Here, frameNames
is a list and you are trying to add it with a string. Adding is not the same as appending. You need to append the new name, or put the new name in a temporary list before adding it.
frameNames.append(str(...))
The third problem is this line:
createWidgetButton = Button(app, text="createWidgets", command=createwidgets())
The above is exactly the same as this:
result = createWidgets()
createWidgetButton = Button(app, text="createWidgets", command=result)
You must pass a reference to a function, not call the function. Change the line to this (notice the lack of parenthesis after createWidgets
):
createWidgetButton = Button(app, text="createWidgets", command=createwidgets)
Unrelated to the problem, but your code would be much easier to read if you used temporary variables instead of repeating the pattern (str("w"+str(len(widgetNames)-1)
. As written, your code is almost impossible to read. Also, you don't want to be storing widget names, you need to store the actual widgets themselves.
And finally, don't do a wildcard import. There is simply no good reason to do it.
Here is how I would rewrite your code:
import Tkinter as tk
app = tk.Tk()
frames = []
widgets = []
def createwidgets():
global widgetNames
global frameNames
frame = tk.Frame(app, borderwidth=2, relief="groove")
frames.append(frame)
frame.pack(side="top", fill="x")
for i in range(3):
widget = tk.Entry(frame)
widgets.append(widget)
widget.pack(side="left")
createWidgetButton = tk.Button(app, text="createWidgets", command=createwidgets)
createWidgetButton.pack(side="bottom", fill="x")
app.mainloop()
这篇关于Tkinter 从按钮动态创建小部件的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!
更多推荐
[db:关键词]
发布评论