对角线打印数字

本文介绍了对角线打印数字的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！ 问题描述

我试图在汇编中对角显示0-9，但是输出将对角打印的数字放在窗口的中间.

I'm trying to display 0-9 diagonally in assembly, but the output puts my diagonally printed numbers in the middle of the window.

这是代码:

start: mov ah, 02h mov cl, 0Ah ;counter (10) mov dx, 02h ;mov bx, 02h mov dl, 30h ;start printing 0-9 mov dh, 02h ;start row mov al, 02h int 21h again: int 10h int 21h ;add dx, 01h inc dh inc dx inc al loop again mov ax, 4c00h int 21h

输出应为:

0 1 2 3 4 5 6 7 8 9

当前输出将打印该内容，但在窗口的中间.我尝试添加新的寄存器bh，并在执行文件时使用它将光标置于当前位置.如何从光标开始显示它?我应该把它放在循环上并递增寄存器ah吗?

The current output prints that, but on the middle of the window. I've tried adding a new register bh and use it to put my cursor on my current position when I execute the file. How can I display it starting on my cursor? Should I put it on a loop and increment register ah ?

推荐答案

您当前的程序失败，因为您可怕地混合了2个系统功能，而这些功能恰好具有相同的功能编号02h，但希望在注册. DOS OutputCharacter函数需要一个字符代码，并将其设置为48，但是BIOS SetCursor函数将解释与列相同的值48.这就是结果显示在屏幕中间的原因！

Your current program fails because you horribly mix 2 system functions that happen to have the same function number 02h, but that expect to receive totally different information in the DL register. The DOS OutputCharacter function expects a character code and you set it at 48, but the BIOS SetCursor function will interpret the same value 48 as the column. That's why the results are displayed in the middle of the screen!

由于您说要从当前光标位置开始，而当前光标位置几乎总是在程序启动时位于屏幕的左边缘，因此根本不需要设置光标位置.

Since you say you want to start from the current cursor position, which will nearly always be at the left edge of the screen at program start, there's no need to set the cursor position at all.

mov ah, 02h mov dl, "0" Next: push dx ;Preserve current character int 21h mov dl, " " ;Your desired output shows this space? int 21h mov dl, 10 ;Linefeed moves the cursor 1 line down int 21h pop dx ;Restore current character inc dl cmp dl, "9" jbe Next

您可以通过查看递增的DL寄存器中的值，而不是使用单独的计数器来决定进行环回.

Instead of using a separate counter, you can decide about looping back by looking at the value in the incremented DL register.

请注意，您使用了loop指令，该指令取决于CX寄存器，但仅初始化了它的CL下半部分！这通常是程序崩溃的原因.

Notice that you used the loop instruction which depends on the CX register but that you only initialized the CL bottom half of it! That's often a reason of program crashing.

编辑

鉴于DOSBox在要求显示字符10时同时发出回车符和换行符(请注意 Michael Petch的注释)，我编写了下一个小程序，并在最新的DOSBox版本0.74中测试了其准确性.

Given that DOSBox emits both Carriage return and Linefeed when asked to display character 10 (brought to my attention in this comment by Michael Petch), I wrote this next little program that I tested for accuracy in the latest DOSBox available which is version 0.74.

ORG 256 ;Create .COM program mov ah, 02h ;DOS.DisplayCharacter mov dx, "0" ;DH is spaces counter, DL is current character jmps First ;Character "0" has no prepended spaces! Next: push dx ;(1) mov dl, " " Spaces: int 21h dec dh jnz Spaces pop dx ;(1) First: int 21h ;Display character in DL push dx ;(2) mov dl, 10 ;Only on DOSBox does this do Carriage return AND Linefeed ! int 21h pop dx ;(2) add dx, 0201h ;SIMD : DH+2 and DL+1 cmp dl, "9" jbe Next mov ax, 4C00h ;DOS.TerminateWithExitcode int 21h