如何配置星号即时消息传递

本文介绍了如何配置星号即时消息传递的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！ 问题描述

星号是否支持即时消息?我已尝试为IM配置星号(此示例)，但是当我尝试将IM发送到另一个Sip帐户星号时会返回警告:

Does asterisk support instant messages? I have tried to configure asterisk for IM (from this example), but when I'm trying to send IM to another sip account asterisk returns warning:

WARNING[20128]: chan_sip.c:16379 receive_message: Received message to sip:test3@192.168.21.153 from sip:test1@192.168.21.153; tag=d9fdcc28313946c5a2a6ae1eae997c62, dropped it... Content-Type:text/plain Message: hahaha 另外，SIP客户端返回消息不允许的方法".这是我的 sip.conf 文件:

WARNING[20128]: chan_sip.c:16379 receive_message: Received message to sip:test3@192.168.21.153 from sip:test1@192.168.21.153; tag=d9fdcc28313946c5a2a6ae1eae997c62, dropped it... Content-Type:text/plain Message: hahaha Additionally the SIP client returns message "method not allowed". This is my sip.conf file:

[general] context=internal allowguest=no allowoverlap=no bindport=5060 bindaddr=0.0.0.0 srvlookup=no disallow=all allow=ulaw alwaysauthreject=yes canreinvite=no nat=yes session-timers=refuse localnet=192.168.21.153/255.255.255.0 accept_outofcall_message=yes outofcall_message_context=internal [test1] type=friend host=dynamic secret=test1 context=internal [test2] type=friend host=dynamic secret=test2 context=internal [test3] type=friend host=dynamic secret=test3 context=internal

这是我的 extensions.conf 文件:

[internal] exten => test1,1,Answer() exten => test1,2,Dial(SIP/test1,60) exten => test1,3,Playback(vm-nobodyavail) exten => test1,4,VoiceMail(test1@main) exten => test1,5,Hangup() exten => test2,1,Answer() exten => test2,2,Dial(SIP/test2,60) exten => test2,3,Playback(vm-nobodyavail) exten => test2,4,VoiceMail(test2@main) exten => test2,5,Hangup() exten => test3,1,Answer() exten => test3,2,Dial(SIP/test3,60) exten => test3,3,Playback(vm-nobodyavail) exten => test3,4,VoiceMail(test3@main) exten => test3,5,Hangup() exten => 8001,1,VoicemailMain(test1@main) exten => 8001,2,Hangup() exten => 8002,1,VoicemailMain(test2@main) exten => 8002,2,Hangup() exten => 8003,1,VoicemailMain(test3@main) exten => 8003,2,Hangup() exten => _.,1,NoOp(SMS receiving dialplan invoked) exten => _.,n,NoOp(To ${MESSAGE(to)}) exten => _.,n,NoOp(From ${MESSAGE(from)}) exten => _.,n,NoOp(Body ${MESSAGE(body)}) exten => _.,n,Set(ACTUALTO=${CUT(MESSAGE(to),@,1)}) exten => _.,n,MessageSend(${ACTUALTO},${MESSAGE(from)}) exten => _.,n,NoOp(Send status is ${MESSAGE_SEND_STATUS}) exten => _.,n,GotoIf($["${MESSAGE_SEND_STATUS}" != "SUCCESS"]? sendfailedmsg) exten => _.,n,Hangup() exten => h,1,Hangup() ; ; Handle failed messaging exten => _.,n(sendfailedmsg),Set(MESSAGE(body)="[${STRFTIME(${EPOCH},, %d%m%Y-%H:%M:%S)}] Your message to ${EXTEN} has failed. Retry later.") exten => _.,n,Set(ME_1=${CUT(MESSAGE(from),<,2)}) exten => _.,n,Set(ACTUALFROM=${CUT(ME_1,@,1)}) exten => _.,n,MessageSend(${ACTUALFROM},ServiceCenter) exten => _.,n,Hangup() exten => h,1,Hangup()

推荐答案

是.星号支持IM.请使用Asterisk 11或更高版本.我认为您使用的是旧版本.我在星号10中也遇到了同样的问题.我将星号升级为星号11.请参阅以下有关Asterisk IM的详细说明.

Yes. Asterisk is supporting IM. Please Use Asterisk 11 or higher version. I think you are using old version. I had same problem in asterisk-10. I upgraded to Asterisk to Asterisk-11. Please see below Detail instruction for Asterisk IM.

在sip.conf文件的常规部分的行下面写.

Write below line in general section of sip.conf file.

[general] accept_outofcall_message=yes outofcall_message_context=dialplan_name auth_message_requests=yes

在extensions.conf文件中的行下面写.这是发送IM的拨号计划.

Write below lines in extensions.conf file. This is dialplan to send IM.

[dialplan_name] exten => _.,1,NoOp(SMS receiving dialplan invoked) exten => _.,n,NoOp(To ${MESSAGE(to)}) exten => _.,n,NoOp(From ${MESSAGE(from)}) exten => _.,n,NoOp(Body ${MESSAGE(body)}) exten => _.,n,AGI(chatplan.php,${MESSAGE(from)}) ;exten => _.,n,Set(ACTUALTO=${CUT(MESSAGE(to),@,1)}) ;exten => _.,n,ExecIf($["${ACTUALTO}" != "sip:${EXTEN}"]?Set(ACTUALTO=sip:${EXTEN})) exten => _.,n,MessageSend(${ACTUALTOS},${MESSAGE(from)}) exten => _.,n,NoOp(Send status is ${MESSAGE_SEND_STATUS}) exten => _.,n,GotoIf($["${MESSAGE_SEND_STATUS}" != "SUCCESS"]?sendfailedmsg) exten => _.,n,Hangup() ; ; Handle failed messaging exten => _.,n(sendfailedmsg),NoOp(Sending error to user) exten => _.,n,Set(SRC=${MESSAGE(from)}) exten => _.,n,Set(DST=${MESSAGE(to)}) exten => _.,n,Set(MSG=${MESSAGE(body)}) exten => _.,n,Set(MESSAGE(body)="[${STRFTIME(${EPOCH},,%d%m%Y-%H:%M:%S)}] Your message to ${EXTEN} has failed. Sending when available") exten => _.,n,Set(ME_1=${CUT(MESSAGE(from),<,2)}) exten => _.,n,Set(ACTUALFROM=${CUT(ME_1,@,1)}) exten => _.,n,MessageSend(${ACTUALFROM},ServiceCenter) exten => _.,n,GotoIf($["${INQUEUE}" != "1"]?startq) exten => _.,n,Hangup() ; exten => _.,n(startq),NoOp(Queueing messaging for offline) exten => _.,n,Set(MSGTIME=${STRFTIME(${EPOCH},,%d%m%Y-%H:%M:%S)}) exten => _.,n,SYSTEM(/var/lib/asterisk/agi-bin/astqueue.sh –SRC ‘${SRC}’ –DST ‘${DST}’ –MSG ‘${MSG}’) exten => _.,n,Hangup()[app-fakeanswer] exten => _.,1,NoCDR exten => _.,n,Set(DESTDEV=${EXTEN}) exten => _.,n,Set(THISDEVSTATE=${DEVICE_STATE(SIP/${DESTDEV})}) exten => _.,n,GotoIf($["${THISDEVSTATE}" = "UNAVAILABLE"]?hang) exten => _.,n,GotoIf($["${THISDEVSTATE}" = "UNKNOWN"]?hang) exten => _.,n,Answer exten => _.,n,Hangup() exten => _.,n(hang),Hangup()

在您喜欢的文件中添加以上行.对IM使用Asterisk-11.我在旧的星号版本中遇到了同样的问题.希望您使用的是Asterisk-11.

Add above lines in your respected files. Use Asterisk-11 for IM. I had same problem in older asterisk version. Hope you are using Asterisk-11.