在 Android 2.3 上实现 OBEX PUSH 服务器

本文介绍了在 Android 2.3 上实现 OBEX PUSH 服务器的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！ 问题描述

我需要在 Android 2.3 设备上设置应用内 OBEX 服务器.使用蓝牙聊天示例代码，我能够设置一个 OBEX 服务器.但是，服务器需要使用自定义 UUID，因此该服务不会注册为OBEX 服务器"

I need to setup an in-app OBEX server on an Android 2.3 device. Using the Bluetooth Chat Sample code I was able to setup an OBEX server. However, the server needs to use a custom UUID so the service is not registered as an 'OBEX Server'

# sdptool browse local ...(snip)... Service Name: OBEX Object Push Service RecHandle: 0x10000 Service Class ID List: UUID 128: ab123abc-1a2b-3c4d-5d7f-1234567890ab Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 18

所以，当我接收数据时，看起来我正在接收一个原始的 OBEX 连接请求:

So, when I receive data, it looks like I am receiving a raw OBEX connection request:

80 00 07 10 00 04 00 00 00 00 ...(snip)... 00 00 00 (1kb file)

是否有我可以使用的 OBEX 实现，或者我是否必须自己实现该协议?

Is there an OBEX implementation that I can use or do I have to implement the protocol myself?

我不想使用内置的 OBEX 服务器 - 这必须在应用程序中.我曾尝试过 BlueCove，但当我在注册服务时遇到问题时放弃了它.

I don't want to use the inbuilt OBEX server - this has to be in app. I have tried BlueCove but I abandoned it when I had issues registering a service.

是的，我确实看到了这篇帖子并阅读了链接，但是天哪，一定有更简单的方法！

Yes, I did see this post and read the link in it, but by golly, there must be an easier way!

推荐答案

我最终自己实现了协议.没有我想象的那么毛茸茸的.由于我只希望连接一个特定的客户端，而且我知道客户端只会推送一个文件，因此我只能部分实现我需要的协议部分.

I ended up implementing the protocol myself. It wasn't as hairy as I imagined. Since I was expecting only a specific client to connect and I knew that the client would only be pushing one file I was able to partially implement only the sections of the protocol that I needed.

一些有助于理解 OBEX 协议的文档是 Obex13.pdf，位于:gitorious/gammu/gsm-docs/trees/e5161a75fb1e1c1608959b27ae3c3940bcf0911b/standards/obex

Some documentation that helped with understanding the OBEX protocol were Obex13.pdf at: gitorious/gammu/gsm-docs/trees/e5161a75fb1e1c1608959b27ae3c3940bcf0911b/standards/obex

我如何解析套接字输入流的快速片段:(注意 OBEXUtils 和 OBEXConstants 是我的类.)

A quick snippet of how I parsed the sockets input stream: (Note OBEXUtils and OBEXConstants are my classes.)

try { //Read all bytes passed in bytes = mmInStream.read(buffer); //Ensure we have the entire packet before we proceed // Packet length is in the 1st and 2nd byte expectedLength = OBEXUtils.bytesToShort(buffer[OBEXConstant.LENGTH_IDENTIFIER], buffer[OBEXConstant.LENGTH_IDENTIFIER + 1]); packetLength = bytes; //Keep reading until we get what we expect. while (packetLength < expectedLength) { bytes = mmInStream.read(buffer, packetLength, maxPacketSize); packetLength += bytes; } //Switch on Packet Header switch (buffer[OBEXConstant.HEADER_IDENTIFIER]) { case OBEXConstant.CONNECT: //Parse the packet and return an acknowledgement packet write(OBEXConnect.parsePacket(buffer)); break; case OBEXConstant.PUT: case OBEXConstant.PUT_FINAL: //Parse the PUT packet and return an acknowledgement packet //For Parsing PUT packets I referred to the android and bluecove implementations write(putPacket.appendPacket(buffer, packetLength)); break; case OBEXConstant.DISCONNECT: //Parse the packet and return an acknowledgement packet write(OBEXDisconnect.parsePacket(buffer)); break; case OBEXConstant.GET: case OBEXConstant.GET_FINAL: case OBEXConstant.SETPATH: case OBEXConstant.SETPATH_FINAL: case OBEXConstant.SESSION: //Did not implement these break; case OBEXConstant.ABORT: Log.w(Constant.TAG, TAG + "ABORT Request Received"); isDisconnected = true; break; default: break; } } catch (final IOException e) { ...(snip)... }

OBEXConstant 的片段:

Snip of OBEXConstant:

public static final byte FINAL_BIT = (byte) 0x80; public static final byte CONNECT = 0x00 | FINAL_BIT; //*high bit always set Connect choose your partner, negotiate capabilities public static final byte DISCONNECT = 0x01 | FINAL_BIT; //*high bit always set Disconnect signal the end of the session public static final byte PUT = 0x02; //(0x82) Put send an object public static final byte PUT_FINAL = PUT | FINAL_BIT; public static final byte GET = 0x03; //(0x83) Get get an object public static final byte GET_FINAL = GET | FINAL_BIT; //(0x83) Get get an object public static final byte SETPATH = 0x05; public static final byte SETPATH_FINAL = SETPATH | FINAL_BIT; public static final byte SESSION = 0x07; public static final byte ABORT = (byte) 0xFF; public static final byte OBEX_RESPONSE_CONTINUE = (byte) 0x90; public static final byte OBEX_RESPONSE_SUCCESS = (byte) 0xA0;